Exhaust pipes

[Lynn Eades]

Here are pics of 2 exhaust pipes. This one is for a riveted carrier

[Lynn Eades]

for the Australian LP2/2a carrier.

[Lynn Eades]

The largest dia of the "ball' part of both types of pipe is 1 1/2" (38mm)

The bore of the pipe is 31.3mm, and the waisted section is 34.3mm.
In both cases the ball part is welded to the rest of the pipe above the waisted bit

The cast elbows (left and right handed) are the same across both types of carriers (and all I have seen are cast in one piece (Kevin))

[kevin powles]

Hi Lynn, Can you tell us the distance from the centre of the weld on the waisted end to the end of the pipe please on the riveted carrier down pipe.

I borrowed a downpipe from richard and its rustered/sheered at that weld point.

thanks kevin.

[Lynn Eades]

52mm. weld centre to end. Ball part is 25.4mm long.

[super dave]

As usual thanks for posting the pictures Lynn it's a great help