Ford Blitz Restoration/Rebuild

[colin jones]

His truck, his choice.
Colin.

[colin jones]

I might just add! I have built many a shed with rivergum and caulfield green trim. Thats what we call it in Adelaide.
Colin.

[Private_collector]

As Captain Mainwaring would say..............ahhh, I was wondering who'd be first to spot that.

[Bob Moseley (RIP)]

Hey guys - I am not trying to impose any colours on anybody. I just use KG3 as it is correct for the era and my local Protec has the formula. As for your panel it makes my life more simple. I will finish it off with several coats of good primer and leave the instruments out so it is easy for you to final coat it.

Bob

[Private_collector]

Thanks very much, I appreciate that. Getting income tax done on Thursday, so will be cashed up in coming week or two.

I didn't intend any offence or disrespect with the reply to your post.

I don't suppose you have a copy of the KG3 formula for Protec you can send me??

If I can get a satisfactory undertaking from the paint shop staff, or find an alternative shop in the next town (40min from my place) I might rethink the decision if ongoing supplies will be consistently available & accurate in tint. Still like the idea of being able to take a can off the shelf and use without mucking around.

I always try to plan ahead and head off potential problems where possible. The local paint shop (only one in town with auto paint) don't give me good vibes as to their skill/ability or desire to assist.

I was quite suprised how easy the Protec was to apply. Apparently this is one of it's known benefits. Last time I painted a vehicle, it was in a now defunct (I have been told) paint brand called Spies Hecker. Protec sprayed well, with good buildup and quick coverage. I contacted Protec customer service today and will try flattening base at 10-15% next time.

Bad dental pain tonight. Had 1x extraction at 1730hrs & anaestetic now worn off. I left my Tramal pain tablets at the office too. I wonder if the scarf with hot water bottle treatment, as seen in old movies, really works. Ask me tomorrow.

Don't forget to floss, people.

[Bob Moseley (RIP)]

Hi Tony - a bit of research shows that

Painters Pit Stop
Gympie
50 Duke Street Gympie, 4570
Phone: (07) 5482 9011

is an outlet/distributor for Protec Paints. I cannot see why Protec here, Head Office, could not forward the formula to them. If you like make some enquiries with them and we'll see what we can do. There are several Protec outlets in Qld and are easy to find with Google. You would be able to identify who is close to you. If it is too hard I could always get it made up here and send to you. I always use a satin finish and they do all the flattening.

Bob

[Andy Cusworth]

Hey Tony,

just clicked why shed green ..... no worries with the overspray !

I think the problems with the some of the Automotive paint is that its designed to be high gloss shine, my local suppplier recommended with the gloss enamel I use to mix 1lt paint to 20% flattener to 20% thinners based on 3 coats and final coat can be 25%... his spec sheets say up to 50% flattener but he said this is in the borderline with it turning out milky.
Going to spray a door first and judge the results but mine is not an original Army replica ans the Fire Brigade demilitarised her so i'm restoring as a 2nd life timber truck type.

Bob is right that if you want army khaki get the right paint so you know you get the shade and finish you want as there is so many out there and plenty of head scratching material !

Got the brackets off the Bumper and the curve is pretty even, so just going to attempt to correct the twist and see how I go from there, heatwise as i dont have acetylene kit is to run a bead of weld on inside of bumper on a line where i need to apply pressure to bend her back to true whilst the weld area is still red hot, will let you know how I go but i have used this before on steel bumpers and it has worked well

[Private_collector]

Originally Posted by Bob Moseley

Hi Tony - a bit of research shows that

Painters Pit Stop
Gympie
50 Duke Street Gympie, 4570
Phone: (07) 5482 9011

is an outlet/distributor for Protec Paints. I cannot see why Protec here, Head Office, could not forward the formula to them. If you like make some enquiries with them and we'll see what we can do. There are several Protec outlets in Qld and are easy to find with Google. You would be able to identify who is close to you. If it is too hard I could always get it made up here and send to you. I always use a satin finish and they do all the flattening.

Bob

I have now received 2 emails from Protec. The first asked what type of paint I had used, and while I thought this slightly odd to request, I complied and replied with same.

Second email was simply "kind regards" & the authors signature, with three attachments, each containing the MSDS for the individual products.

Since receiving this email, I have read & re-read my first contact asking if they held the formula for Khaki Green 3 in satin, and asking of they could supply it ready for use (I.E: flattening base added in an effective amount).

Despite careful scrutiny of my initial correspondence, I am stuffed if I can see ANYWHERE where I have asked for MSDS sheets. Bob, this is exactly the sort of poor attention to detail that I detest. It certainly does NOT inspire confidence to ask one question, and receive an answer completely estranged from the topic. This is precisely why I wanted to 'idiot proof' the paint purchase as much as I can and utilise my color, which is available in spray cans. Unfortunately, this does mean I will need to muck around adding base myself. I will send a third email to Protec, enlightening them to the initial question, and maybe I might get a sensible answer........maybe not!

Surely it's not too much to ask for a response to a simple question, without having to turn the whole thing into what I call a "trilogy in four parts"

On a slightly happier note, if anybody wants a copy of MSDS for Protec Autofleet 609, 609 hardener or R199 Paraglaze, I can send them to you.