|
|
#11
19-06-12, 11:40
|
||||
|
||||
Window frame hinge problem
Phil,
I suspect that is the problem. Frame and hinge parts are from two different sets. The original hinge for this frame is quite poor, as a previous owner had taken to it with a grinder to grind off the bolt heads attaching it to the window support frame. I would not be happy to use that damaged piece as it is, and repair might not be a viable option. On Saturday I will try and find a suitable replacement amongst my parts stores. I think there are another 2 or 3 which may be usable. At very least, the current hinge may be good for the driver side frame. Just when you think things are going well.................stuff happens  .Wouldn't it be grand if parts fit well.......................or at all, in some cases like this? At least the rubber set is ready for installing. I finished these last night, while listening to television.
__________________
Ford CMP, 115" WB,1942 (Under Restoration...still) Medium sized, half fake, artillery piece project. (The 1/4 Pounder) 
|
|
|
Threaded Mode