Correct bolt sizes / lengths question

[Lynn Eades]

Originally Posted by Lynn Eades

Richard, If you mean the cross tube roller brackets, where they bolt to the hull, then they are all 3/8" BSF of various lengths.
They are all countersunk (obvious) heads. The bottom ones that go through the seal retainers, are flat head, and the upper ones are round (boss)head.
They vary in length. the longer ones about 1 5/8". There is a longer one on the left side for the battery earth strap.

Richard, with the above in mind (and Micheals bloody accuracy)
I can now confirm that mis-information starts at least as early as from 60 year olds
(did you notice that the bolt length in my previous post is now correct?) (Now ask Michael how many different sized bossheads there are in a carrier)