![]() |
|
#1
|
|||
|
|||
![]()
Hi Tony
Looks like a fun vehicle to drive and enjoy. I had just finished reading another thread Engine Conversion http://www.mapleleafup.net/forums/showthread.php?t=1082 and some of the thoughts are echoed on having vehicles that we can drive and enjoy is the best way to preserve them. I always explain anything that is not stock or original on any of my trucks as being "field modification" done to make the truck meet the requirements of its currant purpose. Or use the phrase locally supplied body. So drive and have fun. Cheers Phil
__________________
Phil Waterman `41 C60L Pattern 12 `42 C60S Radio Pattern 13 `45 HUP http://canadianmilitarypattern.com/ New e-mail Philip@canadianmilitarypattern.com |
#2
|
||||
|
||||
![]()
Hello Gentlemen,
Ironic that I would end up purchasing such a modified vehicle, isn't it. Though not so surprising, considering the list of things I had to compromise with on the restoration truck, I suppose. Since buying the grey truck I have searched for any branch of the services who might have had similarly colored trucks in WWII. That search was ultimalely unsuccessful, and a number of individuals have advised grey was not used at all by any Australian military units at that time. That's a pity. It would have saved me considerable work, at least in the medium term future. At some point I will be striping down all the bodywork anyway. I would like to retain the rear canopy, and hope to get a green canvas cover (same color as door curtains for other truck) made that will sit straight over the grey one. Obviously the windows and rear flap appetures will have to be slightly enlarged so that when they are rolled up the grey one underneath can be opened also. So far as I can imagine, that should be the only challenge. Side awning will be retained, but green canvas instead of current grey vinyl. The entire canopy and steel frame beneath can be removed with quick release clips pulled upwards. I won't need to test that feature, I wouldn't expect. I should have mentioned in my initial post, that all the mechanicals which are still CMP have been rebuilt by previous owners. Most recent owner rebuilt some components of braking system, such as vacuum booster and pedal bushings. The owner prior to that had wheel cylinders bored and stainless steel sleeved, new rubber brake hoses made, and brake shoes relined. One of the two owners got new brake lines made, but I don't remember which guy did those, nor do I know whether they are stainless steel or steel composite material. Front end and rear axle have been rebuilt entirely. My only issue is with the steering box. While it is not unsafe, and I have 'learnt' how to drive it, there is a little wander in steering, which I want to remedy when I can. I had hoped to swap the steering boxes between the two trucks, as a short term fix, and rebuild the wandery box to then put into other truck. That won't happen. I discovered the grey truck has a smaller steering box in comparisn to the resto truck, so I will have to source one to rebuild then put that into the grey truck so it's not off the road at all. In my experience, small jobs seem to drag on and the vehicle can be disabled far too long, especially if parts need to be ordered from O.S. dsc_0779-resized-960.jpg These are the tyres I will be putting on in place of the civi type which are on now.
__________________
Ford CMP, 115" WB,1942 (Under Restoration...still) Medium sized, half fake, artillery piece project. (The 1/4 Pounder) |
#3
|
|||
|
|||
![]()
Tony, since the new truck is 2 wheel drive, civvy tyres on the front so long as they,r 9.00s will be quieter and may handle better over a longer distance. Sounds like a liquid overhaul may solve the colour problem while you enjoy the smile value on the open road.
__________________
macca C15 C15A |
#4
|
||||
|
||||
![]()
Hey Bob,
Not sure what the tyres are. I'll look, as soon as I get home on Monday. I like 'liquid overhaul'. Not heard that reference before, but in hindsight, I know a number of people who have done one.
__________________
Ford CMP, 115" WB,1942 (Under Restoration...still) Medium sized, half fake, artillery piece project. (The 1/4 Pounder) |
#5
|
|||
|
|||
![]()
It's great to be able to read your interesting postings again Tony.
And with a new??? vehicle that you can drive around in. What a turn up. Your enthusiasm is still shining through. I was looking forward to seeing that French V8 up and running but I guess that will be down the track a little bit now. All the best with your grey (for the moment) CMP. Regards, Terry.
__________________
Terry F30 13 Cab CMP Morris Commercial C8 |
#6
|
||||
|
||||
![]() Quote:
My mate has a genuine Grey WW2 MB Willys Jeep which belonged to the RAN. It came off the docks in Melbourne and is still painted in the Navy Grey colour. He said he wouldn't paint it any other colour than for what it was used for in the Navy. I am sure the Navy also used the two wheeled Blitz as well. Cheers Tony ![]()
__________________
Anthony (Tony) VAN RHODA. Strathalbyn. South Australia |
#7
|
||||
|
||||
![]()
Hey Tony V, long time no see. Yeah, RAN makes sense. Battleships were grey, why wouldn't their vehicles be!. If I didn't have a particular long-term plan, I would do the truck as RAN vehicle, and not bother with the effort involved in changing color. I'm not looking forward to painting it, to be honest, and it will remain grey for quite a while yet.
Although it has absolutely nothing to do with a light grey CMP that has been modified in many ways, I have put my Sons service number on both sides of the cab nose panel. Sometime soon, I should receive vinyl decals, 3" or 4" high (can't remember which I ordered now), that say A.E.M.E. That being, Australian Electrical & Mechanical Engineers, which was the WWII forbear of current RAEME. That is the Corps my Son is with. I know of no Australian Army unit that used grey vehicles, so it's bound to raise eyebrows of the purists, but my desire to demonstrate my respect and honour for a family member overrides my gyro have accurate appearances. I can live with that.......for now. Having then applied the 'stickers', I'll no doubt want to get my moneys worth out of em before I scrape them all off. I'm part Scottish you know! The irony is this, I haven't been able to progress with the other truck through summer because the workshop was just too hot, so anything I achieved was done outside, and now a quick paintjob could be a stop gap until later 'good' job, but it's getting too cold to do so out in the open. It would need to be done in the workshop, which is full of big chunks of the green truck. Catch 22, I'm afraid. All I achieved this past summer was some work on a low tech replica of an artillery piece I am making, just so I have something to drag behind the green truck (or possibly, second truck once green). I don't think anyone here will have heard much about this project. I have been acquiring all the flashy looking bits I wanted to use, but which I simply couldn't make. Still need a lot more though. Most are correct for a 25pdr, but some are just close resemblence and look the part......roughly speaking. The humorous thing is that once completed all of the fancy bits I've been buying will be hidden beneath a canvas cover. After all, it will only be a vague copy. See photos below, including a wooden muzzle brake copy that a Korean War veteran made on a lathe for me, and the canvas cover I had made for it. Barrel is an old lamp post. Breech I made from scrap. Axle is tube steel with Land Rover stubs welded on ends, and wheels are L.R as well. Trails are to be plated with steel sheet on both sides, similar to 25pdr. I forget how many wooden domed top plugs I worked out I would need, to replicate rivets, but have that written down somewhere. It's a folly, I know. dsc_0056-resized-800.jpg dsc_0704-resized-960.jpg dsc_0689-resized-960.jpg dsc_0620-resized-960.jpg dsc_0672-resized-960.jpg More phtos to follow soon. P.S: We arrived home from our trip to Albury, at around 1700hrs. Back to work tomorrow, and not looking forward to early rising for it.
__________________
Ford CMP, 115" WB,1942 (Under Restoration...still) Medium sized, half fake, artillery piece project. (The 1/4 Pounder) |
#8
|
||||
|
||||
![]()
Hi Tony
So glad you are back with us again. I think using your boy's service number is a great idea and in the end who cares about the puritans. You use it anyway you feel is good for you. Anyway its your vehicle to use and enjoy. ![]() Cheers Tony ![]()
__________________
Anthony (Tony) VAN RHODA. Strathalbyn. South Australia |
#9
|
||||
|
||||
![]()
dsc_0069-resized-960.jpg dsc_0772~2-resized-960.jpg dsc_0670-resized-960.jpg dsc_0710-resized-960.jpg dsc_0593-resized-960.jpg
First photo is the equipment cases which will be attached to the inside of front shield, which will be 6mm aluminium........$$$ kachinnng. The second photo shows the inner barrel tube. Best not to ask about the spark plug or piping! It does work though ![]() As i said, a folly!
__________________
Ford CMP, 115" WB,1942 (Under Restoration...still) Medium sized, half fake, artillery piece project. (The 1/4 Pounder) |
#10
|
||||
|
||||
![]()
G'day Tony,
Good to see you back posting on MLU Tony ![]() Kind Regards Lionel
__________________
1940 Chevrolet MCP with Holden Built Cab (30 CWT). 1935 REO Speed Wagon. 1963 Series 2A Army Ambulance ARN 112-211 Series III ex-Military Land Rovers x 2 |
#11
|
|||
|
|||
![]()
Spark plug and piping. Hmmmm. Wiring that into the brake system in lieu of lights per chance?
![]() ![]() |
#12
|
|||
|
|||
![]()
Hi Tony
I don't know what the legislation/regulations are in Vic where I live let alone QLD but wouldn't be surprised at all if you had to register your folly and maybe go through a series of hoops to do it. Things have changed so much in recent years you can't do many of the things we used to be able to get away with. Cheers David
__________________
Hell no! I'm not that old! |
#13
|
||||
|
||||
![]()
Yes David. There are a couple of hoops to throw ones self through!
Not needed yet. Its still a big pile of bits. Some assembly required. Once I have enough parts that require 'good' welding, I will get those all done together. My welding is simply atrocious, and not anywhere near the quality needed for structural joining. I can do minor MIG welds and tack welding, but anything beyond that is out of my league.
__________________
Ford CMP, 115" WB,1942 (Under Restoration...still) Medium sized, half fake, artillery piece project. (The 1/4 Pounder) |
![]() |
Thread Tools | |
Display Modes | |
|
|