|
|
#1
12-04-09, 16:51
|
||||
|
||||
CMP parts needed ..........
Happy easter all on MLU around the globe
 Well still looking for a LH upper gun mount clip and bracket to bolt to back cab wall if anyone has one pls PM or Email me Also need a bridge plate in yellow like OEM for the RH front corner , I have to small brakets on the lip of the fender so assume the plates all have 2 small holes in them to fasten there, If anyone has a decent one pls again PM or email me. Well I think Ill go out and hide my own easter eggs , problem I have is I cant remember where I put them  
__________________
Terry British Columbia , Canada 1942ish F15441-M 
|
|
#2
12-04-09, 17:07
|
||||
|
||||
Br Cl Plates
Quote:
__________________
RHC Why is it that when you have the $$, you don't have the time, and when you have the time you don't have the $$?
|
|
#3
13-04-09, 16:28
|
||||
|
||||
|
Thanks RH
Im in touch with Dan to get one, are the OEM ones steel or aluminum ?, painted or skinned with something ?, painted both sides ? never seen one so I know silly questions
__________________
Terry British Columbia , Canada 1942ish F15441-M
|
|
#4
14-04-09, 12:17
|
||||
|
||||
|
Quote:
This CMP Ford F15A has had its original bridge classification plate refitted when being restored. It is flat and has the size of a CMP headlight aperture. It has four holes along the edge, to fit the plate in place of the headlight, plus two more holes towards the centre to attach it to the truck in case two headlights are fitted.  Hope this helps, Hanno
__________________
Regards, Hanno --------------------------
|
|
#5
17-04-09, 15:53
|
||||
|
||||
|
Thanks Hanno for youir info.
I can get reproductions but would like to exhaust my efforts on finding a NOS one or good used one first, I also would like to use my two tabs and mount by the fender as I have blackout light covers for the headlights.
__________________
Terry British Columbia , Canada 1942ish F15441-M
|
 |
|
|
Linear Mode
