|
|
#14
07-08-09, 02:54
|
||||
|
||||
Some Activity at the Barn
Not too much to report:
Bob is spending the remainder of his vacation splitting wood. Grant is busy with his Mr. Manual duties. Guy was away watching oversized kettles boil. So I had the barn all to my self. After a quick brake bleed, a lube job and oil change, I moved the HUP out of the barn and back into it's shelter - which has dried out somewhat after our prolonged monsoon season here in Ottawa. I posted a poor video on photobucket (http://s143.photobucket.com/albums/r...SummerTest.flv). You should notice a squeaking sound when I shift gears - that is the clutch pedal rubbing the foot plate which is just wired into place. As well, there is a grinding noise when I first move her out into the sun - that is the starter shifter knob wobbling around. The starter is causing some issues - if the knob is too far forward, the gears engage. Too far backwards and the grinding occurs. I hope that a thin spacer between the starter housing and the bell housing will fix this annoying problem - any other suggestions?
__________________
RHC Why is it that when you have the $$, you don't have the time, and when you have the time you don't have the $$? Last edited by RHClarke; 07-08-09 at 03:19. 
|
|
|
Threaded Mode