they are save now at home almost !

Bob Carriere · #1 20-11-09, 02:34

HI Eric

The two brackets you removed should have been left there..... they are part of the brackets that holds the tarp cover inplace when you remove it. You should be able to mig weld them in place without too much trouble

I am not sure about the other holes...... the one with 3 bolts could be for a snorkel running to the top of the engine cover...... do you have a picture fo the top of your engine cover....?? these were very late conversions and very few actually exists..... you may have a missmatched top or engine cover.

The other hole with 6 bolts may have been for an radio antenna base.... it looks the right size.......again not a common conversion..... maybe one of a kind field modification.

Bob C.

NORTH-SHORE(CANADA) · #2 20-11-09, 03:14

Quote:

Originally Posted by Bob Carriere

HI Eric
I am not sure about the other holes...... the one with 3 bolts could be for a snorkel running to the top of the engine cover...... do you have a picture fo the top of your engine cover....?? these were very late conversions and very few actually exists..... you may have a missmatched top or engine cover.
Bob C.

Hi Bob,
Is this what you taking for the engine cover

Bob Carriere · #3 20-11-09, 03:33

I can't tell if it is a pinup picture from your girl friend or a piece of sheet metal....

For God's sake take the engine cover out for a good picture.....

Do the hole in the top line up with the hole in the engine cover...?

BooBee

NORTH-SHORE(CANADA) · #4 21-11-09, 19:35

HI Bob,
Here a better pic of the dog house

and a order pic of the hole from the inside and it prety much a strait line to the cab

NORTH-SHORE(CANADA) · #5 22-11-09, 16:05

Hi,
anyone know about the snorkel on a CMP

NORTH-SHORE(CANADA) · #6 28-11-09, 15:03

Hi,
Here some good new for me

got those windows from Bruce a big Thanks Bruce

the yellow one are from Bruce

You see why I was looking for some good one

Here someting

the only difference ont the windows frame but i don't know is is because is from a chevy or early model

i change it easy

NORTH-SHORE(CANADA) · #7 28-11-09, 15:04

Hi,
Here i am looking for a short braket and here i don't know is the long one is from a chevy because the short one is from my ford

and i am looking for 2 brakets that bolt on the frame of the truck and one knob anyone could help

One is missing please Help

derk derin · #8 28-11-09, 19:09

Eric,
I have a spare knob and the bracket it screws to on the outer window frame but I don't have a spare slider.Let me know where to send it and it's yours.I just removed it from a spare window frame and of course broke the long stud that ties everything together but it can be replaced.I wish I had a set of torches to heat things up properly to remove them.I also needed one of these brackets for my cmp and broke mine while removing it!
Derk.

NORTH-SHORE(CANADA) · #9 28-11-09, 22:11

Quote:

Originally Posted by derk derin

Eric,
I have a spare knob and the bracket it screws to on the outer window frame but I don't have a spare slider.Let me know where to send it and it's yours.I just removed it from a spare window frame and of course broke the long stud that ties everything together but it can be replaced.I wish I had a set of torches to heat things up properly to remove them.I also needed one of these brackets for my cmp and broke mine while removing it!
Derk.

Hi,
OK PM send

NORTH-SHORE(CANADA) · #10 28-11-09, 23:21

Quote:

Originally Posted by NORTH-SHORE(CANADA)

Hi,
Here i am looking for a short braket and here i don't know is the long one is from a chevy because the short one is from my ford

Hi,
I was looking at Derk ford truck and the windows braket is the long one and it a Ford

Why

NORTH-SHORE(CANADA) · #11 29-11-09, 00:40

Quote:

Originally Posted by NORTH-SHORE(CANADA)

Hi,
Here someting

the only difference ont the windows frame but i don't know is is because is from a chevy or early model

i change it easy

HI,
I was looking at Terry truck and he have the long bracket and the little hole on the hinge. So that will be on the early model of the cab 13

hrpearce · #12 29-11-09, 09:53

Hi Eric,
The holes in the centre of the windscreen frame are for the wiper shaft.

NORTH-SHORE(CANADA) · #13 05-12-09, 20:03

Hi,
The last owner of the chevy found this data plate he said it was on the motor any one know any thing about this?

NORTH-SHORE(CANADA) · #14 06-12-09, 00:53

Quote:

Originally Posted by NORTH-SHORE(CANADA)

Hi,
The last owner of the chevy found this data plate he said it was on the motor any one know any thing about this?

Hi,
Do you think this is a rebuilt tag for the motor

cliff · #15 06-12-09, 01:16

be nice if we could accually see the tag rather then a dark smudge in the background of a rather dark photo. Be better if you tidied the photos up so we can see them before you post them.

NORTH-SHORE(CANADA) · #16 06-12-09, 01:19

Quote:

Originally Posted by cliff

be nice if we could accually see the tag rather then a dark smudge in the background of a rather dark photo. Be better if you tidied the photos up so we can see them before you post them.

HI,
Nothing wrong with the photo nice and clear here

Grant Bowker · #17 20-11-09, 04:01

Quote:

Originally Posted by Bob Carriere

HI Eric

The two brackets you removed should have been left there..... they are part of the brackets that holds the tarp cover inplace when you remove it. You should be able to mig weld them in place without too much trouble

I am not sure about the other holes...... the one with 3 bolts could be for a snorkel running to the top of the engine cover...... do you have a picture fo the top of your engine cover....?? these were very late conversions and very few actually exists..... you may have a missmatched top or engine cover.

The other hole with 6 bolts may have been for an radio antenna base.... it looks the right size.......again not a common conversion..... maybe one of a kind field modification.

Bob C.

There was a mount to hold the extendible antenna mast (either 20 or 34 foot versio) on vehicle roofs. The drawing I have of it shows a 3 screw mounting but is not clear whether the mout was for use on truck cabs or the top of the wireless body.

Alex Blair (RIP) · #18 22-11-09, 18:38

Quote:

Originally Posted by Grant Bowker

There was a mount to hold the extendible antenna mast (either 20 or 34 foot versio) on vehicle roofs. The drawing I have of it shows a 3 screw mounting but is not clear whether the mout was for use on truck cabs or the top of the wireless body.

Grant..
What are snorkle holes are what are pictured...You have a great shot of a Ford running in water using the snorkle on the front cover of the Ford Wadeproof manual...This one..#29...(In colour,no less..)

#29: 68 pages FWP-1 FORD CANADA, ILLUS., PARTS LIST SPECIAL WADEPROOF EQUIPMENT for CDN Mil. Pattern Vehicles. (Jun.'45)

NORTH-SHORE(CANADA) · #19 23-11-09, 20:00

Hi,
Anyone have a pic of thos truck

NORTH-SHORE(CANADA) · #20 24-11-09, 21:57

Quote:

Originally Posted by Boob

Bonjour Eric

From what I can see .... you have an official snorkel modification to a Ford engine cover and roof.

These modifications came late in the war and very few survived.... you truck may have been used for training troups or testing in Canada..... I do not recall ever reading that they had been used in actual battle conditions.

Now if you can find the original snorkel tube and the full installation kit you would be a rich man.
Boob

Hi,
Anyone have a pic of this Rare beast