Need help with Morris commercial

[Lynn Eades]

Have you taken the remains to a brake shop?
Usually you need to check; 1 the spigot beating. 2. the thrust bearing. 3. the clutch plate. and, 4. the pressure plate.
If you just need the clutch plate, take it into the brake shop. It usually comes down to the dia. the thickness, and the spline.
I imagine the morry comical has a carbon thrust, and if the clutch is past it , then the pressure plate will need attention as well. Take it all with you, and find the guy behind the counter who shows the most interest.
Let us know how you get on.