New Member

[Jeff Gordon]

Hi Andy,
Welcome aboard!
I live in Samford and also have a C15A.
I have a few parts for sale if you need anything.
Cheers
Jeff

[hrpearce]

Attention Salesman Bob looks like another switch plate like mine.

[Andy Cusworth]

Originally Posted by Jeff Gordon

Hi Andy,
Welcome aboard!
I live in Samford and also have a C15A.
I have a few parts for sale if you need anything.
Cheers
Jeff

Thanks Jeff,

what bits do you have available ? you can email me on cuss1234@hotmail.com if its easier,

Cheers,

Andy

[Bob Moseley (RIP)]

Hi Andy - welcome to the mad world of Blitzs. I built a Chevrolet Blitz half-track, Project Phoenix, and during the course of that build encompassed the following.

Bearings - great supplier and know what they are talking about.

Simmos Industrial Supplies
PO Box 315 Beaudesert Qld 4285
Michelle Dyson – partner (does she know her stuff)
(07) 5541-0533
32 Telemon Street
Beaudesert Qld 4285

I had the master cylinder and four slave cylinders refurbished, new brake shoes on all four drums, brake hose and lines all for about $820. Will never have to look at the brakes again. My supplier also rebuilds the brake booster and he is about the only one in the country that does it.

Bob

[Andy Cusworth]

Thanks Bob,

i saw your conversion in the truck mag !

Thanks for the suppliers details, luckily my shoes are good so should keep cost down a bit, is this the supplier for bearings and brakes or just the bearings ?
cheers
Andy

[Bob Moseley (RIP)]

Hi Andy - just the bearings. The brake guys are here in Adelaide.

Bob

[Jeff Gordon]

what bits do you have available ?

Ar where do I start.
Between me and a mate we have a bit of stuff.
Good cab nose cone, floor,
Diffs, 2 speed transfer case,
tail shafts, bonnet,
rear Canadian body.
possibly a seat.
Lots of bits and pieces.
You would have to come and have a look.
Cheers
Jeff