|
|
#10
05-04-12, 22:41
|
|||
|
|||
Today's dis-assembly tip - that you find when assembling
Hi All
Today's dis-assembly tip, that you find when assembling the parts months later or even the next day. Take a look at the picture below of the linkages laid out on the table. You should notice one thing, but might miss the second important thing but they are related. Well of course you will note that like almost all linkages on CMPs they are adjustable. What is missing from the picture though is a measurement of each one made before you disassemble them to clean them. What I now realize I should have done is laid them all on a piece of paper measured the overall length of each written that on the paper next to each linkage and then taken a picture. Which would have save me a lot of time get the linkages into adjustment when reinstalling them. Cheers Phil
__________________
Phil Waterman `41 C60L Pattern 12 `42 C60S Radio Pattern 13 `45 HUP http://canadianmilitarypattern.com/ New e-mail Philip@canadianmilitarypattern.com 
|
|
|
Threaded Mode