Wanted: Ford info plates for cab 13

[Greg Rogers]

I've got what I think you need. It's got the high and low auxiliary shift pattern. It's not great but it actually looks nicer in real life than the picture shows. The missing bits for each corner are still stuck on the cover as are the other two plates of this set. I don't know what number cab it's from though.
Greg

[Hanno Spoelstra]

Originally Posted by Greg Rogers

I've got what I think you need. It's got the high and low auxiliary shift pattern. It's not great but it actually looks nicer in real life than the picture shows. The missing bits for each corner are still stuck on the cover as are the other two plates of this set. I don't know what number cab it's from though.

Hi Greg,

That looks like the plate Tony needs for his F60S.

Can I buy them off you?

If so, I'll swap them for the set Tony got off David to exchange for the correct one, at some later point in time. Tony?

Thanks,
Hanno

>
> Looking for a set of data plates to go on my F15A
>

[Private_collector]

Hi Greg & Hanno,

Guys, I need to find an info plate that has the corners intact, OR one that has the detail in really good shape, to have some reproduced. Apparently there have been a number of sources that have had these reproduced in the past, but all suitable sources that I am aware of have now dried up.

A nearby contact is checking his vehicles for this plate (original), but there is about a 50/50 chance of success, according to his own reckoning. Another guy has some.............somewhere. His problem is same as mine, safe-keeping locations disappear without a trace when you want to make a 'withdrawl'.

[Greg Rogers]

I will have a close look at the other two plates this weekend. If memory serves me they are in really good shape (well they are still attached so the corners are solid). I'll post some pics.
Greg