O.k I've just about got the shutters sorted out thanks to some MLU Members . One more question I need to machine up the 687-4 collar link large this is the spacer that goes in between inner and outer plates is it a roller or just a fixed spacer also the I need the DIA when I measured the cut outs in the hull i noticed that one of the cut- outs in the armor plate , are not parallel looks like it is narrower then goes into the round part , It looks to me to be around 20mm in DIA to allow it to operate also I also think Lynn mentioned it is the same thickness as the plate . JUST FOUND IT IN THE SPARE PARTS BOOK , SHOULD HAVE LOOKED FIRST 5/8 X 33/64 DALE
__________________
1944 GPW and Bantam trailer
Last edited by Dale Jordan; 15-04-14 at 03:50.
|
15-04-14, 03:40
Similar Threads
Threaded Mode