Heads Up: CMPs for sale in United Kingdom

[Hanno Spoelstra]

Besides the ex-Marchant F15, there are a few more CMPs on the market in the UK:

1942 Chevrolet CMP C15 GS 1942

b.jpg

Produced in Canada during WW2
This example 4x2 15cwt truck was originally destined for north Africa.
Redeployed this truck was shipped to the UK where in 1943 the body was removed and a 20mm anti aircraft gun was fitted by Dennis motors of Guilford Kent. Further wartime history is not known until released in 1946 and being used by Copes garage nr Leeds having had a diesel engine fitted and a small crane jib added
the vehicle has been completely restored taking almost five years with an original spec 6cyl 235 petrol engine.
Price £9850
Steve Tyler: 07748 404246

A tasty looking F30 Cab 12:

1941 CMP Ford 30cwt general purpose truck

a.jpg

Rare model only made for about 12 months with a No 12 cab, opening windscreen and alligator bonnet.
Ford 3.9ltr side valve V8 engine, 4 speed gear box and low range transfer box with 4WD
Owned for 23 yrs and always driven to rallies.
Converted to 12V for convenience.
Good condition,well maintained and could use now but would benefit with a little TLC and repaint.
£7500
Brian Kent: 07853 922222

Plus a Guy Ant - one could say, one of the forefathers of the CMP 15-cwt truck

Extremely Rare 1940 Guy Ant 4x2 15cwt G.S Truck

75939.jpg

One of only 11 4x2 Guy Ants left. Up and running and on the road with good tyres all round On Bendix cable brakes Rare opportunity to own a rare British Softskin. Open to sensible offers Would take Hillman or Austin Tilly in p/x may consider Austin7 or Early Bedford OY QL why
07901 574197
Glynn Beresford

Happy hunting!

H.

[Alex van de Wetering]

Rare Windsor for sale in the UK:

http://www.milweb.net/webvert/76720

Late 1944 Canadian Built Windsor Carrier

a.jpg b.jpg

Being sold as an ongoing restoration project. Most of the heavy engineering has been done along with all the hole drilling just needs finishing off.
All the upper armour is new but still needs engine ,prop shaft ,fuel tanks , differential ,half shafts and radiator.
Along with all the parts shown there is a folder containing many detailed drawings enabling the new owner to fabricate new items such as rear passenger seats , all the stowage boxes front and back , engine decking /side panels etc.
After the next two weeks , work will commence again but the price will go up accordingly.
£19,800.
Colin Waterworth: 07751 061879 or 01925 226186