15-CWT, 2K1, WIRE 5 Body Details

[RichCam]

David and Robert,

Regarding Picture #3, the dual exhaust Y pipe that protrudes through the floor in the generator closet, that is what the Wire 5 Radio Box has at our shop. We removed it to be able to remove the closet frame such that the paneling is exposed. I'm safe to assume then that this Box was then using 2 chore horse generators?

With regards to the map table, I don't have one but I do have the bracket in place and the 4 angled holes for the support rods.

With regards to the +/- plate on the side. If one leaves the copper bar in place behind the wing nuts, I guess it could be used as an external grounding plate. If you spin the wing nuts off, remove the bar, you could use it as a + and - connector through the wall of the box, like Picture #2. I'm not a radio guy but that would be kind of handy, I think.

That's all for now, Steve is working on the window slider frames, Jim is working on the convoy lights - amazing that they work after 70 years of sitting in the mud and stuff once you change out the bulb. I'm still trying to get a couple of hours of peace and quiet so I can finish wiring the dash.

Let me know what you think!