wiper fittings

[Ganmain Tony]

Should be able to get a three way junction block at any place that sells spares for vehicles Eric. Ordinary brake line fittings will join into it and that is what the original set up was anyway.

The T juction block I used was out of my little cab 13.

I agree with Lynn. Your wiper units appear to be Dodge. If they fit, who's to say a set of wiper units werent pressed from a Dodge into a Blitz during the war?

[John Ganton]

My wiper motors are clogged with ancient grease. Has anyone figured out how to free them. WD 40 didn't help.

[rob love]

Dis-assemble them, clean them and lubricate them with fresh lubricant. Personally, I like some of the synthetics like Dow Corning O-ring lubricant. It won't thicken in colder temperature so the wipers will work in all temps.

I have always had success taking them apart. Make sure you check any inlet or outlet tubes going into the motor. Mud wasps normally like to curl up in there and die, blocking the tube.

[Jordan Baker]

Couple years ago Brian Asbury was selling the official Trico tool for opening up these wiper bodies. He also had NOS paper gaskets and Trico grease to go back inside once they were clean. Might be worth contacting him to see if he still had some stuff.