|
|
|
|
#1
13-07-15, 07:51
|
|||
|
|||
The insulators I have here are the dimensions you give Mike except for being 3/8" thick.
If you are still interested PM an address. Dave
__________________
Hell no! I'm not that old! Last edited by motto; 14-07-15 at 02:05. 
|
|
#2
14-07-15, 02:04
|
|||
|
|||
|
On its way
Posted the insulator this morning Mike (14th July)
I did take the Yankee joe to Echuca. I don't remember seeing a yellow one around with an earth borer but I can remember a Yankee Joe with earth border parked in a yard around Berec that could be seen from the Princes Highway. I think it was still in use and was there for some years. Dave
__________________
Hell no! I'm not that old! Last edited by motto; 14-07-15 at 02:10.
|
|
#3
23-07-15, 12:35
|
||||
|
||||
|
running
I have the C8 running OK now, I had a few problems with the Rochester carby .
I have made up a brass metering plug that fits into the fuel inlet brass elbow . The elbow is not original , it had a large 1/4" hole in it and the fuel was gushing in and overcoming the needle and seat to some degree . I drilled a .060" metering hole in the plug I made . I have noticed that Holden Stromberg carbies have a similar metering hole in the fuel inlet union , the hole is progressively larger as the motor increases in ci size from grey up to red 202 . I think the metering hole restricts the fuel flow and the carby is happier . On another topic. Does anyone know what type of mirror fitting method is used on the early cab 11/12 solid rear vision mirror arms ? The non adjustable arms . The mirror mounts to the arm somehow ? I need a close up pic of the mirror and its mount . Mike
__________________
1940 cab 11 C8 1940 Morris-Commercial PU 1941 Morris-Commercial CS8 1940 Chev. 15cwt GS Van ( Aust.) 1942-45 Jeep salad
|
|
#4
23-07-15, 21:47
|
|||
|
|||
|
Have a look at the thread about CMP parts for sale, Ex South America. I think I recall a close up of the mirror showing the clamp.
__________________
Bluebell Carrier Armoured O.P. No1 Mk3 W. T84991 Carrier Bren No2.Mk.I. NewZealand Railways. NZR.6. Dodge WC55. 37mm Gun Motor Carriage M6 Jeep Mb #135668 So many questions....
|
|
#5
24-07-15, 02:29
|
||||
|
||||
|
this one
Quote:
http://www.mapleleafup.net/forums/sh...america&page=2
__________________
1940 cab 11 C8 1940 Morris-Commercial PU 1941 Morris-Commercial CS8 1940 Chev. 15cwt GS Van ( Aust.) 1942-45 Jeep salad
|
|
#6
24-07-15, 03:11
|
|||
|
|||
|
Yes. Did it help?
__________________
Bluebell Carrier Armoured O.P. No1 Mk3 W. T84991 Carrier Bren No2.Mk.I. NewZealand Railways. NZR.6. Dodge WC55. 37mm Gun Motor Carriage M6 Jeep Mb #135668 So many questions....
|
|
#7
24-07-15, 03:19
|
||||
|
||||
|
yes
Quote:
__________________
1940 cab 11 C8 1940 Morris-Commercial PU 1941 Morris-Commercial CS8 1940 Chev. 15cwt GS Van ( Aust.) 1942-45 Jeep salad
|
 |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| For Sale: Morris Commercial Piston Liners | Andrew Rowe | For Sale Or Wanted | 0 | 24-09-14 09:23 |
| For Sale: piston-ring-pin: Chevrolet Canada/US | Dirk Leegwater (RIP) | For Sale Or Wanted | 0 | 29-08-12 16:48 |
| Make your own piston rings | Mike K | The Restoration Forum | 0 | 11-08-11 14:45 |
| Wanted: Piston for Chev Engine | Willanthry | For Sale Or Wanted | 21 | 15-07-09 14:40 |
| Piston Rings | ron | The Restoration Forum | 8 | 25-01-09 11:45 |
Hybrid Mode
