![]() |
|
#1
|
||||
|
||||
![]()
You can also check your local truck stops, many of them have CAT certified scales but will charge you for a scale ticket.
|
#2
|
|||
|
|||
![]()
Hello
It seems this thread has moved to Commercial Motor Vehicle (CMV) category from historic plates. There are lots of good points brought up. Generally 4500 kilograms is the magic number. One thing you must remember is its not the actual combined weight that is looked at, but the Registered Gross Vehicle Weight (RGVW), this is the weight that the trailer and truck is capable of carrying. There are two parts to your truck registration. The left side has the empty weight (GVW). The right side has the RGVW, this is the maximum you registered the vehicle for including occupants, load and trailer. If you exceed this number you are overweight and you pay by the kg over the trucks RGVW. You can get this increased at the MTO office...for a fee of course. The trailer will only have the GVW on the left side. The RGVW will be on the data plate attached to the trailer. (This is the number looked at for RGVW not what you have actually loaded on the trailer). Many time the trucks RGVW is too low, when you add the GVW of the trailer with the GVW of the truck, combined it exceeds the trucks RGVW. If this is the case then you are overweight just hooking the trailer up. If you have an unmodified pickup that exceeds 4500 kg (dual wheels) then you have some exemptions (with CVOR, Annual inspections etc).. that is until you hook up a dual axle trailer. Most dual axle trailers have a minimum RGVW of 3175 kg. Which as soon as you hook up to any truck will put you over 4500 kg. If the trailer requires an annual safety inspection.. so does the truck. MTO now check for CVOR when you renew your vehicles plates. If the RGVW is over 4500 they will not renew it unless you have a CVOR or advise them that it is under the exemption. MTO Enforcers are well trained in this area. It is a standardized training and not up to individual interpretation as insinuated in this thread. It is up to the vehicle owners/drivers to follow the rules. With Commercial Motor Vehicles (those above 4500 kg regardless of what it is being used for) the driver and /or the owner can be charged. Not having an annual safety inspection is a $240.00 fine, for each the trailer and truck. It is cheaper to get the safety than to get the ticket, which then will effect your insurance rating as well. There are no exemptions for renting or borrowing a truck or trailer for annual safety inspections, so make sure it has one if you choose to exceed the 4500 kg category. There may also be a requirement for a daily vehicle inspection and/or log book. Again there are some exemptions but they are very limited and specific. Please go to the MTO web page or e-laws Ontario for more clarification. Don't ask the person at the Service Ontario office, or in law enforcement who does not deal with CMV's on a regular basis as they have limited knowledge. By the way if you are from out of province, i.e. Quebec, you might be exempt from an annual inspection in Quebec but will require to follow the Ontario rules if you choose to drive here and your combination is over 4500 kg. Thanks Eric
__________________
Collecting data on the WW2 Canadian jeep and trailer. Serial, WD Numbers etc. |
#3
|
|||
|
|||
![]()
Hello
I just reread my last posting. Just to clarify i am talking predominantly about the Annual Safety Inspection requirements for Ontario. Some info is relevant to the CVOR. So that there is no confusion... the definition of a Commercial Motor Vehicle is different for the Annual Safety Inspection and the CVOR. Each has their own classification and exemptions. Just because you might be exempt from the CVOR does not mean that you are exempt from the Annual Safety Inspection. i.e Most pick up trucks towing a dual axle trailer will require an annual safety inspection on both the truck and trailer. But they do not necessarily require a CVOR. It can be confusing, especially if you look at everything together rather than look at each requirement separately. Thanks Eric
__________________
Collecting data on the WW2 Canadian jeep and trailer. Serial, WD Numbers etc. |
#4
|
|||
|
|||
![]()
Grant/Eric
I am now really confused about which vehicle/trailer combination needs registration other than the standard mandatory vehicle plate registration. I'm talking here of a standard pick-up (3000kg) with 2 axle trailer (GVW i.e. max load designed for of 3500Kg but actual weight much less even with load). The examples from MTO that you quoted, Grant , talk of trailer weight less than, or more than 2800 kg. Is this the ACTUAL weight of trailer and load or the RGV weight for which the trailer is designed which would often be much higher than the actual weight? |
#5
|
|||
|
|||
![]()
Hello David
Is 3000 kg your empty or registered weight? I am guessing that this is your Registered Gross Vehicle Weight on the right side of your registration. If this is your RGVW you cannot exceed that weight with any load, or load/ trailer combination. Otherwise you pay by the kg overweight. Look at your Gross vehicle weight (GVW) this is your empty weight on the left side of your registration. Add that to the empty weight of the trailer. (On your vehicle registration) You should find that it may be higher than 3000. If so you need to increase your RGVW at Service Ontario to reflect your true weight. Your actual weight has to be lower than that of the RGVW. With your trailer having a RGVW of 3500 kg (from your data plate) this will place your combination higher than 4500 kg. It is what the trailer is capable of carrying and not what you are actually carrying. As such you need to have an annual safety inspection on both the truck and trailer. If your actual combined weight is less than 4500 kg you will not need a CVOR. If it is higher than 4500 kg then you will need a CVOR. Remember CVOR and Annual Safety Inspections are two different things. In addition if you need a CVOR you should also require a pre-trip inspection and possible a daily log book depending on the distances you travel. Even if just done once. Thanks Eric
__________________
Collecting data on the WW2 Canadian jeep and trailer. Serial, WD Numbers etc. |
#6
|
|||
|
|||
![]()
Thanks, Eric - now very clear. I'll be checking actual weights in the spring when I can get at the kit but it looks like I may be in the commercial haulage business unintentionally!
Frankly, for about 4 or 5 outings a year it may not be worth all the hassle so I may bow out gracefully! |
#7
|
|||
|
|||
![]()
Eric,
Our trailer GVW goes to 10,400 lbs., max. The M37 ramps up well, at just under 5,800 lbs. The M38 is a lighter haul, at just over 2,000 lbs. So we stay well within the load limits. Locking down to ensure compliance to MTO is necessary. However, it does make travelling to events a bit of a chore, and we may cut back on going out with our MV'S. |
![]() |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
Sold: CMP C-15A Wire 3 Vehicle Plates | RichCam | For Sale Or Wanted | 1 | 15-05-15 02:50 |
Historic Vehicle Association - 2010 Study | Phil Waterman | The MLU Sappers Mess | 4 | 30-11-13 15:02 |
Historic commercial vehicle rally | Euan McDonald | Military Shows & Events | 4 | 18-11-12 22:32 |
Club Historic Rego plates | Ryan | The Sergeants' Mess | 9 | 29-06-07 16:29 |
DMKF - Danish Historic Military Vehicle Association | Hanno Spoelstra | The Softskin Forum | 5 | 03-12-04 01:36 |