M113 track

[rob love]

Investigated a bit further regarding the tracks on the Canadian M113s.

The Diehl 213B track was the one with the flat spot on the pins. Originally installed in the latter half of the 70s, they were prone to shedding their end connectors, and the fleet was subject to severe speed limitations and no use of public roads while it was being investigated. Being of the "live track" variety, there was potential for the broken track to climb onto the vehicle and hurt the crew commander.

The M113 fleet (including the Lynx) changed over to the Diehl 213G track in the early 80s. The pins look round, but are described as hexagonal in the manuals. I'll have to have a closer look at some of our spare track sections to see if this is the case. The end connectors are also slightly re-enforced over the pins.

Re the 513, Canada was going to it, and it was fielded for the M113A3 fleet. However, at some point the decision was made to go entirely to the Soucey rubber band track, and the 513 is now gone from the Canadian system. We hold one section of this track out in the shed I believe.

Re ice grousers, they are a very real consideration here in Canada. I have not seen any documented evidence that we used the pin type Douglas describes, but rather we used the type that were installed in place of the track pad. I think they went on every 4th section of track, but I would have to confirm that in case anyone really needs to know. Edited to add I confirmed they are in fact every 7th or 8th pad. I also noted that there are ice grousers for the Soucey track. They appear to be more akin to the radial tire cables used on cars and light trucks.