F60L resto NSW Australia

[Tony Smith]

Originally Posted by Jacques Reed

Hi Mike,

Attached is the 3 bolt divers helmet distributor to a crab distributor adaptor plate I mentioned.

Looking at it, and the description, a cam button spacer is needed for some stock shallow cam noses.

So perhaps the other way to use an earlier distributor on a post war engine and vice versa is to also change the timing gear cover. Again, I am not sure if this is possible so perhaps another person can enlighten us. I agree, I don't know why one would want to use a divers helmet distributor as opposed to a crab distributor on a later engine but nothing surprises me when it comes to the old engines!

http://www.speedwaymotors.com/Flathe...olt,25076.html

The Ford Manuals describe the method to interchange the "Diver's Helmet" and "Crab" distributors. The two timing covers are interchangable, and are the same height from the block to the dizzy mounting surface. 18-6019B has the 3 bolt mounting pattern for the Divers Helmet (and earlier) distributors, and 21A6019 has the 2 bolt pattern for the Crab, the '46-on and the Thames/Lucas styles.

The Camshafts however, are different. A long cam is used with short drive key of the 3 bolt dizzy's, and a short cam with the longer drive key of the 2 bolt style. If you need to fit a "Short" 3 bolt dizzy to a "Short" cam, in addition to swapping the timing cover there is a Ford spacer. If you are fitting a "Long" Crab dizzy to an earlier "Long" cam, then the Speedway style spacer will provide the additional length.

This might be necessary in wartime if you are maintaining a fleet of LP2 Carriers or MCP trucks with the Divers Helmet dizzys, and a replacement engine of the Crab style is supplied. To maintain commonality, you might want to replace the Crab with a Divers Helmet?

IMG_7234.JPG IMG_7238.JPG

IMG_7235.JPG IMG_7236.JPG IMG_7237.JPG