VICKERS MK6B's resto - MLU FORUM

MLU FORUM

		MLU FORUM > MILITARY VEHICLES > The Armour Forum
VICKERS MK6B's resto

PaperClip

colin jones VICKERS MK6B's resto 17-10-16, 03:56

colin jones Between the two tanks I have... 17-10-16, 04:03

Lynn Eades Great to see you getting into... 17-10-16, 06:25

Rob Dyba Glad they are in your hands... 17-10-16, 09:26

PaperClip

colin jones Hi Lynn, yes it is about time... 17-10-16, 10:31

PaperClip

colin jones A couple of the seats and I... 17-10-16, 10:33

Ben Looking forward to seeing... 17-10-16, 13:00

eddy8men a rare beast for sure. good... 17-10-16, 23:32

jdmcm WOW....how cool is that? Such... 18-10-16, 05:23

PaperClip

colin jones I have spent the morning... 18-10-16, 05:39

jack neville A nice win to start with... 18-10-16, 08:20

Rob Dyba Hi Colin, If you have the... 19-10-16, 07:11

colin jones Hi Jack, this is indeed a... 19-10-16, 10:03

PaperClip

colin jones Hello one and all. :) I'm... 17-12-16, 06:19

PaperClip

colin jones You can see the damage that... 17-12-16, 06:22

PaperClip

colin jones I resurrected my poor old... 17-12-16, 06:28

PaperClip

colin jones It certainly shows up the... 17-12-16, 06:32

PaperClip

colin jones The other photo's were taken... 17-12-16, 06:38

PaperClip

colin jones A few more strengthening... 17-12-16, 06:41

PaperClip

colin jones I tried a thinner piece first... 17-12-16, 06:49

Wayne Hingley Very impressive work as usual... 17-12-16, 15:53

PaperClip

colin jones Thanks Wayne, I pressed out... 18-12-16, 01:45

PaperClip

colin jones It's a bit hard to get much... 24-12-16, 10:07

PaperClip

colin jones I am starting at the back and... 24-12-16, 10:11

PaperClip

colin jones I'm glad Xmas is over and I... 28-12-16, 08:14

PaperClip

colin jones A little bit more and I'll... 28-12-16, 08:16

Rob Dyba Looks like the carrier... 28-12-16, 08:25

PaperClip

colin jones Yes Rob, I think i've... 29-12-16, 11:22

PaperClip

colin jones I am so very lucky to have... 29-12-16, 11:24

PaperClip

colin jones Once I have the top frame... 29-12-16, 11:26

PaperClip

colin jones Quite a good day today as I... 31-12-16, 11:12

PaperClip

colin jones I will have a lot of rivets... 31-12-16, 11:14

PaperClip

colin jones That's about all the side... 02-01-17, 10:58

PaperClip

colin jones I gave my son Andrew a job to... 02-01-17, 11:01

Howard Colin Jones 05-01-17, 10:14

PaperClip

colin jones Come on Howard, be nice now!... 05-01-17, 10:49

PaperClip

colin jones I'm ever so glad to have an... 05-01-17, 10:51

PaperClip

colin jones I had to put a hole in the... 05-01-17, 10:55

PaperClip

colin jones A test fit and it's all good,... 05-01-17, 10:58

Howard Colin Jones 06-01-17, 14:17

PaperClip

colin jones I'm having to make the cast... 08-01-17, 11:20

PaperClip

colin jones I made the end flange, welded... 08-01-17, 11:23

PaperClip

colin jones I needed an accurate distance... 08-01-17, 11:30

super dave Looking good, I love to watch... 09-01-17, 07:21

PaperClip

colin jones Thankyou Dave, you can't beat... 09-01-17, 11:47

Ryan Looks like it's coming... 09-01-17, 12:07

Petr Brezina Excellent workmanship! :thup: 09-01-17, 12:47

PaperClip

colin jones Yes Ryan, this is some really... 10-01-17, 10:54

PaperClip

colin jones The top section has a doubler... 10-01-17, 10:57

David Herbert My grandfather had me working... 10-01-17, 11:33

Alex van de Wetering Lovely work Colin! As others... 10-01-17, 21:28

David Dunlop Colin. Are those internal,... 11-01-17, 05:18

colin jones Thanks Alex, I will document... 11-01-17, 10:24

PaperClip

colin jones The part I made today is at... 11-01-17, 10:31

PaperClip

colin jones Some parts I just have to cut... 11-01-17, 10:35

PaperClip

colin jones For a smallish plate to make... 11-01-17, 10:38

PaperClip

colin jones That's the top part of it... 11-01-17, 10:43

Frantisek Nachlinger ..well said. Great thread! 11-01-17, 12:55

PaperClip

colin jones Thankyou Frantisek! I did... 16-01-17, 10:48

PaperClip

colin jones Time for the other side which... 16-01-17, 10:57

PaperClip

colin jones Just some more of the same... 16-01-17, 11:00

PaperClip

colin jones That's all of the upper... 16-01-17, 11:02

PaperClip

colin jones And a shot of the inside.... 16-01-17, 11:07

Howard progress 16-01-17, 11:27

lynx42 Have you seen this one,... 25-01-17, 05:30

Robin Craig This thread is a delight to... 25-01-17, 10:56

jack neville Amazing work Colin. Have you... 16-01-17, 12:43

colin jones Thanks jack, I did years ago.... 16-01-17, 21:31

Bob Carriere What is your next project???? 17-01-17, 03:37

Dave Mills Amazing work, machining down... 17-01-17, 07:18

Lynn Eades Colin, back to Jack's... 17-01-17, 10:29

PaperClip

colin jones Thankyou one and all! Lynn,... 18-01-17, 01:54

PaperClip

colin jones I welded the graft plates and... 18-01-17, 07:25

PaperClip

colin jones There were some support... 18-01-17, 07:27

PaperClip

colin jones After I made the jig it was... 18-01-17, 07:31

jack neville Looking good Colin. I'm glad... 18-01-17, 08:18

PaperClip

colin jones Thanks Jack, there is a lot... 20-01-17, 08:21

PaperClip

colin jones The bracket are for shovel,... 20-01-17, 08:24

PaperClip

colin jones I also cleaned up the other... 20-01-17, 08:27

maple_leaf_eh Let's not lose sight of the... 23-03-17, 13:46

PaperClip

colin jones Yes Terry, very true, they... 24-03-17, 23:26

PaperClip

colin jones I am well documenting this... 24-03-17, 23:31

jack neville What is the plan to... 24-03-17, 23:51

David Dunlop What type of alloy is the... 25-03-17, 01:49

colin jones Yes jack, i'm in the process... 25-03-17, 05:12

Lynn Eades Colin, is it possible there... 25-03-17, 07:10

colin jones Hi Lynn, as far as I know... 25-03-17, 22:22

PaperClip

colin jones The pulldown is now complete... 26-03-17, 05:31

PaperClip

colin jones After going through the bits... 26-03-17, 07:26

Howard Jigsaw with missing pieces 26-03-17, 08:41

Lynn Eades And me Howard. :salute:... 26-03-17, 11:39

PaperClip

colin jones Howard/Lynn, I wouldn't go... 27-03-17, 06:10

PaperClip

colin jones I will make a self aligning... 27-03-17, 06:12

Mike Cecil Hi Colin, This may have... 27-03-17, 16:55

David Dunlop Interesting post, Mike. I... 27-03-17, 21:35

colin jones Interesting Idea Mike, I have... 28-03-17, 12:25

Petr Brezina Good luck Colin, incredible... 28-03-17, 13:26

Russ Gregg What an incredible project, I... 28-03-17, 15:08

David Herbert Well put Russ ! I would... 28-03-17, 15:58

Bob Carriere Impressed.....absolutely... 28-03-17, 16:25

Russ Gregg I have designed motorcycle... 28-03-17, 21:35

colin jones Thank you all for your words... 28-03-17, 22:05

PaperClip

colin jones I have started with the end... 30-03-17, 04:18

PaperClip

colin jones There is one thing I can... 30-03-17, 04:23

PaperClip

colin jones I am quite happy with my... 01-04-17, 05:15

PaperClip

colin jones I thought I would show you... 01-04-17, 05:19

PaperClip

colin jones With this method of curving,... 01-04-17, 05:29

jdmcm So let me get this straight... 02-04-17, 07:00

colin jones Hi John, well lets say, I'm... 02-04-17, 12:23

Matt Stephenson Hi Colin, Very, very... 02-04-17, 12:32

Hanno Spoelstra Colin, I am amazed by... 02-04-17, 12:41

Robin Craig Among the many things this... 02-04-17, 14:12

colin jones Well, all I can say is... 02-04-17, 22:40

PaperClip

colin jones This part is the centre of... 05-04-17, 03:35

PaperClip

colin jones Obviously the location of the... 05-04-17, 03:39

PaperClip

colin jones The gear that fits into the... 05-04-17, 03:42

PaperClip

colin jones The housing is complete and... 05-04-17, 03:44

Lynn Eades Colin, it looks to me that... 05-04-17, 07:31

David Herbert I agree with Lynn, almost... 05-04-17, 10:24

David Herbert Just been looking at the... 05-04-17, 10:38

colin jones Lynn, I think you hit the... 05-04-17, 13:14

Frantisek Nachlinger This thread is a real... 05-04-17, 15:26

PaperClip

Richard Farrant Hi Colin, The gear in the... 05-04-17, 21:47

David Dunlop Hi Colin. Since the... 05-04-17, 22:58

Richard Farrant Hi David, see the attached... 05-04-17, 23:07

David Dunlop Hi Richard. I don't doubt... 06-04-17, 04:01

Richard Farrant Hi David, The Tank Museum in... 06-04-17, 10:16

Lynn Eades I now concur with Richard... 06-04-17, 12:36

colin jones Thankyou Richard, you cleared... 06-04-17, 13:23

Richard Farrant Hi Colin, Good to hear you... 06-04-17, 18:48

Mike Cecil No Mechanic?? 06-04-17, 19:28

PaperClip

colin jones Thanks Mike. I have just done... 07-04-17, 04:52

PaperClip

colin jones Well it's looking half... 07-04-17, 05:02

Petr Brezina You know what Colin? I was a... 07-04-17, 08:50

PaperClip

colin jones Thankyou Petr. Now that I... 07-04-17, 09:09

PaperClip

colin jones I have now got the main box... 09-04-17, 09:07

PaperClip

colin jones Everything is fitting and... 09-04-17, 09:10

PaperClip

colin jones Such a pain :( I just ran out... 09-04-17, 09:12

Lynn Eades :note: :note: :note: :salute:... 09-04-17, 10:28

Russ Gregg I am quite capable with a... 09-04-17, 11:09

colin jones Hi Lynn, yes as a matter of... 09-04-17, 11:49

Alex van de Wetering Colin......awesome work! I am... 09-04-17, 23:29

PaperClip

colin jones Thankyou Alex, I too am... 10-04-17, 12:44

PaperClip

colin jones I thought this part was going... 10-04-17, 12:46

PaperClip

colin jones I won't weld this part in... 10-04-17, 12:48

David Dunlop It's fascinating, Colin,... 10-04-17, 15:13

motto Looked at in isolation the... 11-04-17, 02:25

Lynn Eades On a visit to Colins, he... 11-04-17, 08:30

Tony Mathers Most Tank manufacturers of... 11-04-17, 13:19

Grant Bowker Use of aluminum might be for... 11-04-17, 15:51

Richard Farrant The gearbox casing is quite... 11-04-17, 21:43

colin jones I don't think it would have... 11-04-17, 23:34

Tony Smith :eek: Understatement? ... 12-04-17, 04:09

PaperClip

colin jones I have now had the gears in... 12-04-17, 05:17

PaperClip

colin jones I also put the side bearing... 12-04-17, 05:19

PaperClip

colin jones Well that's it!! i've welded... 12-04-17, 05:26

super dave Again WOW, I think that only... 12-04-17, 06:53

Russ Gregg A hundred years from now this... 12-04-17, 13:53

Mike Cecil ....Unless Colin does what... 12-04-17, 17:21

PaperClip

colin jones Thankyou Dave, but I think... 13-04-17, 11:59

PaperClip

colin jones These two pieces are 1" thick... 13-04-17, 12:02

jack neville It will be an interesting... 13-04-17, 16:53

PaperClip

colin jones I set my original box on my... 14-04-17, 07:34

PaperClip

colin jones It is now welded and just... 14-04-17, 07:36

PaperClip

colin jones I missed a couple of welds... 14-04-17, 07:39

PaperClip

colin jones Almost finished all the holes... 15-04-17, 10:08

David Dunlop When you add your data plate,... 15-04-17, 13:42

PaperClip

colin jones Yes Dave, unfortunately I'm... 16-04-17, 03:38

PaperClip

colin jones Well that's about it for... 17-04-17, 06:11

PaperClip

colin jones I am really happy with my... 17-04-17, 06:18

PaperClip

colin jones I have to say that i'm ever... 17-04-17, 06:24

David Dunlop Looks fantastic, Colin. Well... 17-04-17, 11:34

PaperClip

colin jones Thankyou Dave, I will use... 18-04-17, 10:30

Howard Idea 18-04-17, 10:55

hrpearce My wild guess is; mount it in... 18-04-17, 10:59

PaperClip

colin jones The box is totally finished... 18-04-17, 11:23

Chris Collins A wild guess.... 18-04-17, 11:50

colin jones Chris, you got the prize. It... 18-04-17, 12:25

charlie fitton Damn! I didn't even see the... 18-04-17, 13:06

Wayne Henderson box 18-04-17, 14:15

PaperClip

colin jones Thanks Wayne, I'm pretty... 21-04-17, 13:02

PaperClip

colin jones It's incredible that all the... 21-04-17, 13:11

Tony Smith I think you need to get a... 21-04-17, 14:13

Lynn Eades Colin, Can you put up a... 21-04-17, 20:47

PaperClip

colin jones I already have a hobby thanks... 22-04-17, 05:59

PaperClip

colin jones Hi all, I haven't forgotten... 17-05-17, 13:25

PaperClip

colin jones I have just done a bit on the... 17-05-17, 13:30

PaperClip

colin jones The centre section was quite... 17-05-17, 13:35

PaperClip

colin jones The front of the second... 25-05-17, 13:43

PaperClip

colin jones The hull was seriously out of... 25-05-17, 13:47

PaperClip

colin jones I took both Vickers out of my... 27-05-17, 10:42

PaperClip

colin jones That's one floor off and one... 27-05-17, 10:46

PaperClip

colin jones Interesting rear suspension... 27-05-17, 10:51

Lynn Eades Corten type floor going in... 27-05-17, 11:28

David Dunlop Looks like, apart from the... 27-05-17, 11:48

colin jones Sorry Lynn but, what is a... 27-05-17, 12:55

David Dunlop Curiosity question, Colin. ... 27-05-17, 15:30

Lynn Eades Colin, I bought a sheet... 27-05-17, 22:31

Andrew Rowe Floor 27-05-17, 22:33

colin jones David, there is a lot of... 28-05-17, 00:54

Tony Smith Corten is the steel used in... 28-05-17, 09:27

PaperClip

colin jones Well, I won't forget Corten... 28-05-17, 11:29

PaperClip

colin jones Again the port power was... 28-05-17, 11:33

PaperClip

colin jones I have now got both of the... 31-05-17, 11:42

PaperClip

colin jones The floor of the other one is... 31-05-17, 11:49

PaperClip

colin jones They will both be ready for... 31-05-17, 11:51

James P Mr. Jones, you are doing some... 01-06-17, 14:51

BradB He's not even fixing a tank. ... 01-06-17, 21:42

PaperClip

colin jones I have completed the hull... 09-06-17, 12:56

jack neville Looking good Colin. 09-06-17, 13:26

PaperClip

colin jones Hi jack, even better now with... 11-06-17, 11:12

lynx42 Excellent Colin, I see there... 11-06-17, 11:59

colin jones Hi Rick, no that is how it... 11-06-17, 12:03

lynx42 Thanks Colin, shows how much... 11-06-17, 12:28

PaperClip

colin jones I thought I would put up some... 12-06-17, 03:45

David Dunlop Colin, they both look so tidy... 12-06-17, 04:45

Howard Progress 12-06-17, 08:18

James P Good lord you folks down... 12-06-17, 12:45

Mike K hardening 12-06-17, 14:16

Lynn Eades I made mine from 4140 and... 12-06-17, 20:17

colin jones Hi Mike, Lynn, I'm familiar... 12-06-17, 22:53

jack neville When I rebuilt my Marmon... 13-06-17, 00:46

PaperClip

colin jones Jack, I'm sure your lathe... 14-06-17, 05:48

PaperClip

colin jones These brackets are relatively... 14-06-17, 05:51

Howard Wow 14-06-17, 11:41

Tony Smith No.... Wizardry. Makes me... 14-06-17, 16:23

Mike Cecil Hi Colin, Outstanding job.... 14-06-17, 17:09

David Dunlop Colin. I love watching how... 14-06-17, 17:43

colin jones Thankyou for your comments.... 14-06-17, 23:06

Mike Cecil Thanks Colin, I appreciate... 15-06-17, 00:24

PaperClip

colin jones Hi Mike, interesting thought... 15-06-17, 05:10

Mike Cecil Thanks Colin, I appreciate... 15-06-17, 05:31

PaperClip

colin jones I need some more 5/16 rivets... 18-06-17, 11:13

PaperClip

colin jones There is a combination of... 18-06-17, 11:16

Lynn Eades For those that don't know,... 18-06-17, 12:22

David Dunlop Wow, Colin, that is an entire... 18-06-17, 13:21

Mike Cecil Lynn, Good point regarding... 18-06-17, 19:54

Lynn Eades Mike, thanks for the info. my... 18-06-17, 22:30

colin jones David, yes that was an epic... 18-06-17, 22:51

Lynn Eades For an attempt at clarity:... 18-06-17, 22:54

PaperClip

colin jones Here's a few pics of the... 19-06-17, 03:04

PaperClip

colin jones Now this raises an... 19-06-17, 03:11

Mike Cecil Colin, Tanks were normally... 19-06-17, 03:21

colin jones Mike, I think you have... 19-06-17, 08:18

Andrew Rowe Wheels 19-06-17, 08:35

PaperClip

colin jones Hi Andrew, a very interesting... 30-06-17, 06:00

PaperClip

colin jones As you can see, I flipped... 30-06-17, 06:06

Lynn Eades Colin, what happened to Bob... 30-06-17, 08:21

David Dunlop Looking a bit like a 1930's... 30-06-17, 08:26

colin jones Lynn, I think Hugh Davis got... 30-06-17, 10:36

James P True, try posting some... 30-06-17, 13:01

Lynn Eades Hi Colin. What is wrong with... 01-07-17, 01:49

colin jones James, I might just do that... 01-07-17, 08:37

Mike Cecil 'Happy wife .... happy life!'... 01-07-17, 16:05

PaperClip

colin jones These couple of pieces are... 02-07-17, 11:20

PaperClip

colin jones It must be surrounded by some... 02-07-17, 11:23

PaperClip

colin jones Being sunday and I'm... 02-07-17, 11:28

Mike K 6 wheeler lorry 02-07-17, 13:12

Tim Lovelock Hi Colin, Following your... 03-07-17, 01:22

David Dunlop I wouldn't think a rubber... 03-07-17, 02:26

PaperClip

colin jones Mike, there is one of those... 03-07-17, 08:55

PaperClip

colin jones I was fortunate to be able to... 03-07-17, 08:59

PaperClip

colin jones The door that has the repair... 03-07-17, 09:04

PaperClip

colin jones I thought I would share a... 04-07-17, 02:57

PaperClip

colin jones I had to make two sets of... 04-07-17, 08:17

PaperClip

colin jones I was ever so lucky to get a... 04-07-17, 08:20

PaperClip

colin jones Just an update at my... 12-07-17, 10:03

PaperClip

colin jones I'm also ready to turn the... 12-07-17, 10:06

David Dunlop Nice to see them both finally... 12-07-17, 15:03

James P Amazing work and problem... 13-07-17, 02:23

PaperClip

colin jones Yes David it is and very... 16-07-17, 10:10

PaperClip

colin jones I need to test fit and drill... 16-07-17, 10:13

PaperClip

colin jones Axles fitted with the help of... 16-07-17, 10:24

colin jones I forgot to resize some pics... 16-07-17, 10:25

PaperClip

colin jones I just posted one and the... 16-07-17, 10:30

PaperClip

colin jones I thought I would share this.... 18-07-17, 03:07

James P Again, great stuff and when... 18-07-17, 17:33

Lynn Eades If everything is cleaned up,... 18-07-17, 20:21

David Dunlop Colin. What do the circular... 19-07-17, 02:22

colin jones The other side :) 19-07-17, 03:52

Chris Collins Colin, whats the plan with... 19-07-17, 04:06

PaperClip

colin jones Sorry David, I was just being... 19-07-17, 04:22

Chris Collins Fair enough, especially if... 19-07-17, 05:30

David Dunlop Not a problem, Colin. The... 19-07-17, 05:59

PaperClip

colin jones David, unfortunately very... 19-07-17, 07:48

Ryan For your viewing pleasure... 20-07-17, 04:23

PaperClip

lynx42 Hi Colin, Don't you ever... 20-07-17, 07:13

PaperClip

colin jones Thanks Ryan, they were... 20-07-17, 10:51

PaperClip

colin jones The rear bogie system is... 20-07-17, 10:59

Mike K colours 22-07-17, 08:40

PaperClip

colin jones Mike, thanks for the info.... 27-07-17, 06:40

PaperClip

colin jones All suspension parts are... 27-07-17, 06:47

Dave lean all lined up 28-07-17, 13:18

colin jones Oh! I never noticed that... 28-07-17, 22:24

Mike Cecil The medical profession might... 28-07-17, 23:45

David Herbert I agree with Mike - OCO is a... 29-07-17, 10:57

Tony Smith And an excellent way to... 29-07-17, 22:48

The Bedford Boys Tony, just like a Carrier,... 30-07-17, 07:45

PaperClip

Dennis Cardy Colin, Have been following... 30-07-17, 22:14

colin jones Hi Dennis, I was aware of... 30-07-17, 22:37

Dennis Cardy Hi Colin, Thanks for your... 30-07-17, 23:17

PaperClip

colin jones All my small componentry is... 31-07-17, 06:59

Dave lean Oh dear. 31-07-17, 10:01

David Dunlop Colin. Purely a neophyte... 31-07-17, 12:41

colin jones Hi David, I'm sure they can... 31-07-17, 13:24

David Dunlop Good to know, Colin. I don't... 31-07-17, 15:44

PaperClip

colin jones David, thank you so much for... 02-08-17, 12:40

Ben Great job Colin. The... 02-08-17, 20:42

PaperClip

colin jones Hi Ben and yes I do have... 09-08-17, 05:34

PaperClip

colin jones It is great that there is new... 09-08-17, 05:38

David Dunlop I can almost smell the... 09-08-17, 18:50

PaperClip

colin jones :)David, it's getting closer... 12-08-17, 08:11

David Dunlop Am I correct, Colin, in... 12-08-17, 15:06

David Dunlop OK. So I sit out on the patio... 12-08-17, 16:12

Lynn Eades A visitor from a foreign... 12-08-17, 22:54

Bruce Parker (RIP) "Bowerbird"...is this an... 13-08-17, 03:05

colin jones David, sometimes we all need... 13-08-17, 05:43

colin jones I sent the museum a email... 14-08-17, 23:06

Bruce Parker (RIP) Welded shut??!!???? That is... 14-08-17, 23:37

Richard Farrant When I was seeking... 14-08-17, 23:39

colin jones Yes it is such a shame it's... 15-08-17, 00:37

PaperClip

colin jones The suspension is now... 16-08-17, 11:36

PaperClip

colin jones Wombat is now back on its... 20-08-17, 05:50

Mike Cecil Bruce, All the Mk6A tanks... 20-08-17, 06:42

jdmcm You have come a long way... 20-08-17, 07:24

Tim Lovelock Hi Colin, Wow, what... 20-08-17, 10:47

PaperClip

colin jones Thanks John, you certainly... 23-08-17, 10:02

PaperClip

colin jones There's plenty of light at... 23-08-17, 10:04

PaperClip

lynx42 Hi Colin, A couple of... 23-08-17, 11:45

jack neville Coming along nicely Colin. A... 23-08-17, 12:17

PaperClip

colin jones Hi Rick, great photos. There... 24-08-17, 01:53

colin jones Is there anyone in the UK... 28-08-17, 05:01

Ben Hi Colin Try Namrick,... 28-08-17, 09:12

Hanno Spoelstra Hello Colin, Astounding... 28-08-17, 23:45

Richard Farrant Hi Rick, Both those photos... 29-08-17, 00:40

colin jones Thanks Hanno, my email... 29-08-17, 05:13

colin jones I now have my bolts on order... 29-08-17, 12:50

PaperClip

colin jones I've been quite busy making... 31-08-17, 09:55

PaperClip

colin jones I needed some T section so I... 31-08-17, 10:00

PaperClip

colin jones I used a 8.8 bolt for the... 31-08-17, 10:03

PaperClip

colin jones It's finished and is a very... 31-08-17, 10:04

Lynn Eades Hi Colin. The hinges look to... 31-08-17, 12:56

colin jones Hi Lynn, yes you are right... 01-09-17, 03:01

Lynn Eades We are of course talking a... 01-09-17, 05:17

colin jones :)Yes we are. 01-09-17, 06:12

Richard Farrant Instruments 01-09-17, 10:36

David Dunlop Colin. Is the driver's... 01-09-17, 12:25

PaperClip

colin jones That's great Richard as that... 01-09-17, 13:16

PaperClip

colin jones After some very careful... 02-09-17, 13:12

James P Colin, that is jaw dropping... 07-09-17, 01:38

Tony Smith :coffee :eek: :coffee :eek:... 07-09-17, 03:20

PaperClip

colin jones Thanks James, gotta do what... 09-09-17, 05:17

PaperClip

colin jones I am constantly making jigs... 09-09-17, 05:29

PaperClip

colin jones My internet is really slow... 09-09-17, 06:09

PaperClip

colin jones Very good system and it works... 09-09-17, 06:11

PaperClip

colin jones I'm now waiting on my main... 09-09-17, 06:12

jdmcm Ok now you're just showing... 09-09-17, 21:56

PaperClip

colin jones You might be right john :)... 10-09-17, 05:37

Chris Collins Colin, have you considered... 10-09-17, 12:43

George Moore A wonderful restoration,... 11-09-17, 13:18

George Moore Colin, If I can be of help in... 11-09-17, 13:36

Ben Blue light 11-09-17, 14:18

Ben Hi George, would you mind... 11-09-17, 14:24

colin jones George, unfortunately the fan... 11-09-17, 22:57

Richard Farrant Hi Ben, I would say that the... 11-09-17, 23:11

Richard Farrant Instrument panel 12-09-17, 00:39

Dave lean dash lamp 12-09-17, 08:10

Lynn Eades Colin, do you have anything... 12-09-17, 11:27

Ben From a low res picture of the... 12-09-17, 11:44

Lynn Eades The speedos were not real... 12-09-17, 12:14

colin jones Thankyou everyone for their... 12-09-17, 12:47

PaperClip

colin jones Here's a bit better picture... 12-09-17, 12:54

Dave lean Amps 12-09-17, 17:15

Richard Farrant Colin, The water temp gauge... 12-09-17, 19:42

PaperClip

Richard Farrant Hi Colin, I have found the... 12-09-17, 22:26

colin jones Dave, Excellent and see you... 12-09-17, 22:51

Richard Farrant Hi Colin, They are my... 12-09-17, 23:15

Richard Farrant Colin, Something else, on... 12-09-17, 23:29

PaperClip

colin jones Nice brand new rubber and... 13-09-17, 12:53

PaperClip

George Moore Some interior info 13-09-17, 16:51

PaperClip

George Moore Rotary platform and... 13-09-17, 17:40

colin jones George, that's fantastic as... 13-09-17, 22:43

Richard Farrant Hi Colin, Looking at... 13-09-17, 23:17

colin jones Hi Richard, yes they are of... 14-09-17, 00:42

PaperClip

Richard Farrant Colin, Unfortunately the... 14-09-17, 01:33

PaperClip

colin jones Richard, an interesting point... 14-09-17, 01:33

Richard Farrant Colin, that illustration is... 14-09-17, 01:47

George Moore e mail 14-09-17, 10:18

PaperClip

colin jones I got my springs back today... 14-09-17, 13:36

George Moore Info on its way 14-09-17, 14:56

PaperClip

colin jones I must say thankyou to George... 15-09-17, 05:51

PaperClip

colin jones Hmm! I just found out how to... 15-09-17, 06:29

Richard Farrant Hi Colin, Great work, I... 15-09-17, 11:04

Tony Smith And you can take it in... 15-09-17, 12:42

charlie fitton "thanks to ben for the blot... 15-09-17, 12:43

Dave lean rarety 15-09-17, 14:08

Mike Cecil Evan rarer, a pair of... 15-09-17, 18:23

colin jones Blot,............BLOT!......wh... 15-09-17, 23:19

Bruce Parker (RIP) Black and white blots are the... 15-09-17, 23:35

Lynn Eades And then there was the... 16-09-17, 07:38

Tony Smith Yes, but none of those are... 16-09-17, 08:34

PaperClip

colin jones After double and triple... 16-09-17, 09:55

PaperClip

colin jones Some rivets are upside down... 16-09-17, 09:58

Howard Mr Jones 17-09-17, 01:24

colin jones Said the nut to the bolt... 17-09-17, 03:38

PaperClip

lynx42 You now need two of these... 18-09-17, 03:02

Lynn Eades Is it a Retriever? If so,... 18-09-17, 03:46

lynx42 Lynn, it is an AEC/FWD... 18-09-17, 04:32

PaperClip

lynx42 Aec/fwd r6t/850 18-09-17, 05:05

simon king IWM Duxford has an R6T in the... 18-09-17, 07:52

Niels V The R6T is no longer at... 18-09-17, 09:36

George Moore I have been in contact with... 18-09-17, 11:29

Ben As one of the owners of the... 18-09-17, 22:06

PaperClip

lynx42 One off the web for Colin to... 19-09-17, 01:31

colin jones It's quite OK, hi-jack away... 19-09-17, 03:29

PaperClip

George Moore Blatant hijack 19-09-17, 12:26

PaperClip

colin jones I have relatively good head... 23-09-17, 08:16

PaperClip

colin jones The vision blocks are 1"... 23-09-17, 08:19

PaperClip

colin jones There is also quite a bit of... 23-09-17, 08:21

PaperClip

colin jones And the last few 23-09-17, 08:22

PaperClip

colin jones I got quite a lot done in the... 01-10-17, 10:17

PaperClip

colin jones I also replaced the top of... 01-10-17, 10:19

PaperClip

colin jones all mudguards are also... 01-10-17, 10:21

David Dunlop Nice work again, Colin. The... 01-10-17, 11:35

PaperClip

Ryan Some pics 03-10-17, 01:17

PaperClip

colin jones Thank you David, the engine... 03-10-17, 07:12

PaperClip

colin jones End of the lights. 03-10-17, 07:14

PaperClip

colin jones I have also started the... 03-10-17, 07:18

Alex van de Wetering Awesome work again Colin! I... 03-10-17, 13:03

PaperClip

colin jones Thankyou Alex, just doin' the... 09-10-17, 12:39

PaperClip

colin jones The holes are for the air... 09-10-17, 12:59

PaperClip

colin jones Everyday is progress,... 13-10-17, 12:11

PaperClip

colin jones I still can't believe how... 13-10-17, 12:13

Dave lean From above.. 13-10-17, 12:39

David Dunlop Colin. Top to bottom on... 13-10-17, 17:03

maple_leaf_eh If it took you a day to... 13-10-17, 17:50

James P God damn, every time I roll... 15-10-17, 01:08

Lynn Eades Just to make sure you aware... 15-10-17, 03:31

colin jones Dave, I don't think they gave... 15-10-17, 11:18

PaperClip

colin jones Another rather eventful day.... 15-10-17, 11:25

PaperClip

colin jones I am trying to replicate all... 15-10-17, 11:30

PaperClip

colin jones Light at the end of the... 15-10-17, 11:35

George Moore One HAS to be called COLIN... 15-10-17, 13:13

Ryan in an emergency 16-10-17, 05:05

David Dunlop If tanks have personalities,... 16-10-17, 17:43

PaperClip

colin jones George, somehow "Colin" just... 20-10-17, 14:10

PaperClip

colin jones I'm not sure how you would... 20-10-17, 14:12

PaperClip

colin jones I know one thing! The bonnet... 20-10-17, 14:16

David Dunlop Colin. What type, if any,... 20-10-17, 15:31

Petr Brezina Just beautiful, amazing work!... 20-10-17, 15:37

Richard Farrant David, The drivers head is... 20-10-17, 22:06

Dave lean Mirrors 21-10-17, 00:11

Lynn Eades Hi colin, I had a mirror arm... 21-10-17, 00:56

Bruce Parker (RIP) I'm watching this... 21-10-17, 02:14

Little Jo Contact 23-10-17, 14:42

George Moore Possibly a No 11 wireless... 26-10-17, 05:37

Lynn Eades I know very little about the... 26-10-17, 06:02

colin jones I did get some info about the... 26-10-17, 11:51

PaperClip

colin jones It is probably a bit... 26-10-17, 11:58

PaperClip

colin jones Bending the channels took a... 26-10-17, 12:00

PaperClip

colin jones They are a seriously heavy... 26-10-17, 12:02

PaperClip

colin jones Luckily I only need to make... 26-10-17, 12:05

PaperClip

colin jones I have a couple of pics of... 26-10-17, 12:08

PaperClip

colin jones The drivers seats are... 27-10-17, 04:03

Peter Samsonov Wow, great work so far! I am... 27-10-17, 22:21

Mike Cecil Colin, More likely a No.... 28-10-17, 02:59

PaperClip

Mike K wireless 28-10-17, 03:44

colin jones Mike, I read somewhere that... 28-10-17, 07:14

charlie fitton (Now we get to see him make... 28-10-17, 13:47

Mike Cecil Hi Colin, The No.7 set was... 28-10-17, 19:31

David Herbert Regarding the driver's seat:... 28-10-17, 22:37

PaperClip

colin jones Thankyou all for your... 30-10-17, 04:46

PaperClip

colin jones I also happen to notice that... 30-10-17, 07:24

Tony Smith See, this project hasn't been... 30-10-17, 07:28

Mike K Wireless set No. 9 30-10-17, 09:31

colin jones Tony, I'm so glad I'm not... 30-10-17, 11:20

PaperClip

colin jones I am fortunate to have an... 31-10-17, 08:11

PaperClip

colin jones There are quite a few panels... 31-10-17, 08:13

charlie fitton I want you to be my... 31-10-17, 12:22

James P I want to move into your... 05-11-17, 01:21

PaperClip

lynx42 Hi Colin, Three photos... 05-11-17, 05:56

PaperClip

colin jones Hi Rick, thanks for the... 11-11-17, 07:02

PaperClip

colin jones After spending a couple of... 11-11-17, 07:10

PaperClip

colin jones They are a good fit and... 11-11-17, 07:13

PaperClip

colin jones With all the photos of the... 11-11-17, 07:16

George Moore Odd bracket 13-11-17, 15:50

Lynn Eades Colin, is that in the engine... 14-11-17, 08:12

PaperClip

lynx42 Nearly an inside photo but... 14-11-17, 11:27

PaperClip

colin jones Lynn, no, the engine bay is... 14-11-17, 11:45

Jordan Baker Could it be for storing the... 14-11-17, 13:58

colin jones Hi Jordan, that too crossed... 14-11-17, 20:55

Bruce Parker (RIP) The 4" discharger tubes were... 15-11-17, 02:07

PaperClip

colin jones Well I don't think it is for... 15-11-17, 04:00

Lynn Eades Variometer??? I don't know... 15-11-17, 06:03

colin jones Lynn, I too am a novice about... 15-11-17, 06:30

David Dunlop Interesting "Mystery Mount"... 15-11-17, 18:55

colin jones :doh:David, I was going to... 15-11-17, 20:39

James P Good lord the work you are... 16-11-17, 00:10

Bruce Parker (RIP) Ah, measuring tapes...the... 16-11-17, 00:28

Richard Farrant Hi Colin, Reading the manual... 16-11-17, 01:20

PaperClip

lynx42 Colin, out today in England... 16-11-17, 11:43

Mike Gurr It is an article on the... 16-11-17, 16:45

Niels V The firm is fairly active on... 16-11-17, 20:17

simon king An idea re mystery bracket 16-11-17, 22:23

Richard Farrant Hi Colin, It has just dawned... 16-11-17, 22:42

PaperClip

Richard Farrant The wireless battery charging... 16-11-17, 22:49

jack neville It is an Australian Tank... 17-11-17, 00:26

Lynn Eades So I was nearly there with... 17-11-17, 01:07

colin jones I think you're all trying to... 17-11-17, 01:43

George Moore Dynamo mounting 17-11-17, 11:49

PaperClip

colin jones Although I was quite angry... 18-11-17, 09:21

PaperClip

colin jones I guess it is a bit like the... 18-11-17, 09:23

Lynn Eades Colin, for the un initiated,... 18-11-17, 09:51

colin jones Sure Lynn, from the... 18-11-17, 12:13

PaperClip

lynx42 Colin I do not know if this... 18-11-17, 12:42

simon king Useful discussion about the... 18-11-17, 15:03

Lynn Eades Thank you Colin. Next... 18-11-17, 20:44

colin jones That is all great... 18-11-17, 22:28

Howard Nice 11-11-17, 07:17

David Dunlop Hello again, Colin. I am... 11-11-17, 13:15

Richard Farrant David Take a look at the... 11-11-17, 13:39

Chris Suslowicz As regards the radio fit,... 19-11-17, 01:06

Mike Cecil Well spotted Chris: the Mk6A... 19-11-17, 01:53

PaperClip

colin jones I have also continued on... 19-11-17, 03:38

PaperClip

colin jones As there are only two on each... 19-11-17, 03:43

PaperClip

colin jones I am certainly convinced that... 19-11-17, 03:55

PaperClip

colin jones After removing the sump as... 20-11-17, 03:33

PaperClip

colin jones I may have to re-evaluate... 20-11-17, 03:39

David Dunlop Colin. Bit of a shame... 20-11-17, 04:43

Dave lean Hi Col', with a bit of luck... 20-11-17, 08:05

Niels V I know it might be far... 20-11-17, 09:37

simon king I think the Hurg used the 4... 20-11-17, 13:53

PaperClip

Phillip Wombat 21-11-17, 13:21

Richard Farrant And if my eyes are not... 21-11-17, 18:33

Chris Suslowicz From the thickness of the... 22-11-17, 19:15

David Dunlop Nice photo, Philip! Now Colin... 22-11-17, 20:03

PaperClip

colin jones Phillip, what a great photo.... 23-11-17, 04:04

PaperClip

stephen crowhurst Photo 23-11-17, 09:59

Lynn Eades In keeping with what Chris... 23-11-17, 10:13

Mike Cecil The No9 (and 109?) uses the D... 23-11-17, 16:48

Lynn Eades Yes Mike, It's a whole nuther... 23-11-17, 19:03

RichardT10829 Colin. This may seem... 24-11-17, 20:00

Richard Farrant Richard, As I mentioned to... 24-11-17, 21:19

Snowy There was a restoration of a... 25-11-17, 01:27

David Herbert Very interesting link Snowy.... 25-11-17, 01:54

PaperClip

colin jones Thankyou all for your input.... 25-11-17, 10:24

PaperClip

colin jones The two brass sieves are good... 25-11-17, 10:26

PaperClip

colin jones I managed to get the... 26-11-17, 03:38

PaperClip

colin jones I'm really happy that 4 of... 26-11-17, 03:42

PaperClip

Dave Mills Hello Colin, have been... 26-11-17, 06:20

PaperClip

colin jones Hi Dave, thanks for the offer... 26-11-17, 06:38

simon king The Lagonda aficionados seem... 26-11-17, 11:48

Tony Smith And also seem to suggest that... 26-11-17, 12:15

colin jones Hmm, that was some... 26-11-17, 20:36

Lynn Eades Colin I read some where that... 26-11-17, 21:02

Ben I spoke with a Lagonda... 26-11-17, 22:00

maple_leaf_eh There is a story of an... 13-12-17, 12:18

Grant Bowker Like others, I'm impressed by... 13-12-17, 13:52

David Herbert Grant, If the fins were... 13-12-17, 16:17

James P Sweet mother of god you take... 13-12-17, 16:32

Tony Smith Good lord, point me to the... 13-12-17, 20:38

colin jones Thankyou gentlemen for you... 14-12-17, 11:12

George Moore Please do video the start... 14-12-17, 15:26

Perry Kitson Colin, Absolutely... 14-12-17, 22:05

PaperClip

colin jones George, I don't think the 3mm... 15-12-17, 01:01

James P To funny, I can relate about... 15-12-17, 13:15

RichardT10829 OUTSTANDING ! And that... 17-12-17, 15:16

PaperClip

colin jones Happy New year to all. I... 07-01-18, 09:51

PaperClip

colin jones Quite a few angles to these... 07-01-18, 09:55

PaperClip

colin jones Hopefully I'll get them... 07-01-18, 09:56

PaperClip

colin jones Both fuel tanks are completed... 08-01-18, 05:51

Niels V Would there have been... 08-01-18, 10:12

colin jones Hi Neil, yes the baffle I... 08-01-18, 20:19

David Dunlop How, or were, the tanks... 08-01-18, 21:20

colin jones Hi David, there are a number... 08-01-18, 21:43

PaperClip

Ryan Vickers tanks. 11-01-18, 05:24

Tim Lovelock https://youtu.be/OgIRcNjtmqQ... 17-01-18, 07:51

Ganmain Tony Mr Jones 18-01-18, 00:48

PaperClip

colin jones Ryan, Tim. Thanks for the... 19-01-18, 02:17

PaperClip

colin jones I have also done the water... 19-01-18, 02:21

More replies below current depth...

Tony Smith TRW, not TWR, is a major... 26-11-17, 22:39

colin jones Interesting comments but I... 27-11-17, 09:18

David Dunlop Well that news is a quantum... 27-11-17, 12:53

RichardT10829 Love it ! if you don't quit... 29-11-17, 15:35

PaperClip

colin jones I know it's been a while... 13-12-17, 06:49

PaperClip

colin jones This part is the riser in... 13-12-17, 06:51

PaperClip

colin jones This is certainly going to... 13-12-17, 06:53

PaperClip

colin jones I had to be relatively spot... 13-12-17, 06:56

PaperClip

colin jones Just as well for me that most... 13-12-17, 06:58

PaperClip

colin jones I think I got a bit out of... 13-12-17, 07:01

PaperClip

colin jones And a general put together to... 13-12-17, 07:03

PaperClip

colin jones It does all sit together very... 13-12-17, 07:08

Big D VICKERS MK6B's resto 13-12-17, 07:23

David Dunlop I must be sure to go to the... 13-12-17, 10:13

Richard Farrant Colin, The Lagonda club... 20-11-17, 09:24

colin jones After a closer look, I can... 20-11-17, 09:48

Ben Looking really great Colin,... 20-10-17, 15:38

RichardT10829 yet more of the same high... 20-10-17, 19:39

Mike K I would think with a large... 15-10-17, 11:30

jack neville And a Carrier to push it by... 18-09-17, 04:29

Richard Farrant Hi Colin, I see you are... 17-10-16, 10:32

colin jones Hi Richard, I'm curious here.... 21-02-17, 06:01

Richard Farrant Hi Colin, That information... 21-02-17, 09:52

More replies below current depth...

Prev

Previous Post

Next Post

Next

#11

Old

08-01-18, 21:43

colin jones colin jones is offline

colin jones is offline

Registered User

Join Date: Jun 2007

Location: Adelaide

Posts: 1,810

Default

Hi David, there are a number of brackets inside the rear well with felt padding that holds the tank in place and another one on the rear plate that when bolted down holds downward pressure on the tank which holds it securely in place. I think the strap you may have seen in some other photos would be one of two straps that hold the water tank in place in the adjoining compartment.
Colin.

Reply With Quote

« Previous Thread | Next Thread »

Posting Rules
You may not post new threads You may not post replies You may not post attachments You may not edit your posts BB code is On Smilies are On [IMG] code is On HTML code is Off Forum Rules

Forum Jump

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Door Resto	Barry Churcher	The Restoration Forum	13	15-05-22 15:36
FAT cab 13 No 9 resto	Mrs Vampire	The Softskin Forum	27	29-09-21 06:11
C15A resto	harrygrey382	The Restoration Forum	9	08-06-15 09:40
another CAN m37 resto	Steve Wilson	The Restoration Forum	11	25-08-12 15:57
m 37 resto in new brunswick	pauljboudreau	Post-war Military Vehicles	118	07-03-11 22:29

All times are GMT +2. The time now is 01:17.