Info needed: Correct location for rifle holders in Cab13 F60S

[Andy Mitchell]

Hi,
My F30 LAAT has the same set up.

But s far as i can make out, there was a second battery fitted in the 13 cab, I believe for Russia originally the measurements match the battery holder on the OS step - it has the holes for the hand primer by the drivers seat.

[Jacques Reed]

Hi Mark,

I looked at your initial posts and now know what a LAAT looks like. I had been thinking it was similar to the Australian self-propelled Bofors as per the attached from the AWM via Pinterest.

I have attached another picture of that variant in "The History of Ford in Australia" by Norm Darwin and looking through a magnifying glass there isn't even a lower rear cabin back to hold the upper rifle bracket let alone rifle butt holders on that variant!

Maybe a dumb question but what makes a truck a LAAT and not a GS vehicle?
Is it the fit out inside the rear body?

Cheers,

[Mark Towers]

Hi Jacques,

Superb pictures ... very interesting to look at! Thanks for posting them.

And yes you are right indeed.... it’s all down to the fit inside the body, and also the F60S has a winch to pull the Bofors out of the mire if it should become stuck!

The lockers on the side of the metal body are stowage bins for 8x 40mm Ammo boxes (4 each side) and the rear had seating for 6 x men (3 on each side) plus a rear facing seat that a ‘breaksman’ sits on to pull the rope that helps break the trailered gun. The rear also has internal stowage bins for the soldiers personal equipment and spare wheels, a central locker for a coffin for the spare barrel and other compartments for spares for the gun itself.



Unfortunately on my example none of the above exists today as it was removed by the bus company that used her after the war. And I need to re fabricate the entire set up ..... I do have the 2 x Crew lights that belong in the rear which is a start . I’m not sure how to go about making the lockers and rear seats but there are some marvellous examples on this forum
which owners have made !!

The first pic is us on the move to a show and the second pick is us finally set up����

[Mark Towers]

More pics

The first pic is me on the way to a show

The second pic is an a copy of the correct lay out in the rear

Hope you have found this useful .. 👍🏻 There is no such thing as a silly question 😀

Kind regards,

Mark

[Jacques Reed]

Hi Mark,

And thank you too for the detailed explanation and the extra photos which make it all clear. You have a very nice looking combination there.

Perhaps our NZ members can answer a question:
In 2002 on a voyage to New Zealand, the ship's agent took me to a salvage yard between Lyttleton and Christchurch to show me a Ford CMP truck sitting there. Didn't take any photos unfortunately, but I distinctly remember the side storage lockers on the body which was different to any Australian bodied vehicle I had seen up to that time. I just assumed it was a New Zealand body variant of a GS vehicle. My friend was not a MV enthusiast so could not shed any light on the subject.

So, based on that info, did the NZ Army use the same LAAT as Mark's example and therefore I was looking at a LAAT?

Cheers,

[Frantisek Nachlinger]

We have unrenovated cab 13 F60L still with original holders - and they are in the corners...

[jeepfinger]

Hi Mark,

I didn't know that you where into CMP's, just thought that you had the BSA?

Up where I live, in the 80's we had a scrap yard that had a few Ford LAAT's. I think they had been used by The United Bus Company. They feature in one of the early Wheels and Tracks.
Where did you get yours from? I know that Simon Johnson from Blackburn/Preston sold one some time ago. I had part share in a Chev C15, but it was sold about 12 years ago to someone in the Midlands, would like to find out where it went.

Yours is looking good.

Dave

[Alastair Thomas]

Originally Posted by Andy Mitchell

Hi,
My F30 LAAT has the same set up.

But s far as i can make out, there was a second battery fitted in the 13 cab, I believe for Russia originally the measurements match the battery holder on the OS step - it has the holes for the hand primer by the drivers seat.

This comment caught my eye as on our F60S LAAT we have a slot in the driver's floor board, between the seat and the door, with a wider hole at one end. This is surrounded by fixing holes and I do not know what this is for. I have seen one other and it is blanked off.