How To: C15a Wire-3 restoration - MLU FORUM

MLU FORUM

		MLU FORUM > MILITARY VEHICLES > The Restoration Forum
*How To:* C15a Wire-3 restoration

PaperClip

Jordan Baker C15a Wire-3 restoration 27-03-05, 00:54

PaperClip

Jordan Baker next photo 27-03-05, 00:55

cmperry4 Very nifty - that trailer box... 27-03-05, 01:27

Jon Skagfeld Re: next photo 27-03-05, 05:08

Jordan Baker Don't worry about the tac... 29-03-05, 01:13

PaperClip

Jordan Baker Well after more then 1 year... 14-08-06, 04:06

PaperClip

Jordan Baker Rear end 14-08-06, 04:08

PaperClip

Jordan Baker And here is most of the parts... 14-08-06, 04:10

Jon Skagfeld Jordan: If you have the data... 14-08-06, 06:05

PaperClip

Jordan Baker Jon, unfourtunatly the data... 17-08-06, 06:10

PaperClip

Jordan Baker More parts painted in the... 26-08-06, 02:29

PaperClip

Jordan Baker More parts freshly primed 26-08-06, 02:30

PaperClip

Jordan Baker I also managed to get more... 26-08-06, 02:31

PaperClip

Jordan Baker Not only was it jsut cleaned... 26-08-06, 02:32

Ken Hughes c15a 26-08-06, 08:21

PaperClip

Jordan Baker Thanks for the compliments... 28-08-06, 01:49

PaperClip

Jordan Baker ONe thing that I have found... 28-08-06, 01:55

PaperClip

Jordan Baker And just for fun I added the... 28-08-06, 01:57

PaperClip

Jordan Baker Started work on cleaning up... 31-08-06, 03:41

Alex van de Wetering Jordan, What do you use to... 31-08-06, 10:54

Jordan Baker Hi Alex I use an angle... 31-08-06, 16:34

chris vickery Jordan, Its also not too... 31-08-06, 17:29

PaperClip

Jordan Baker Its been a long time, but the... 28-04-14, 05:06

Alex van de Wetering Jordan, Good to see your... 28-04-14, 23:06

PaperClip

Jordan Baker More disassembly. Pulled off... 09-06-14, 15:14

rob love Personally I use the mig with... 09-06-14, 19:24

Bob Carriere Try the gas....... it's a gas... 09-06-14, 20:08

Gordon Yeo 500 watt lights! 09-06-14, 20:29

PaperClip

Jordan Baker Thanks for all the... 10-06-14, 01:01

PaperClip

Jordan Baker Frame all ready for... 04-08-14, 16:09

Phil Waterman Do Not Use Por 15 on smooth... 05-08-14, 15:54

Bob Carriere Correct as usual... 05-08-14, 16:27

Jordan Baker Thanks for the info and tips... 05-08-14, 22:25

PaperClip

Phil Waterman I used Por's Metal Etch still... 06-08-14, 23:56

chris vickery Why don't you guys ditch the... 07-08-14, 01:06

Bob Carriere The rougher the better. 07-08-14, 04:20

charlie fitton Paint - 07-08-14, 13:22

Grant Bowker POR is available at (at least... 07-08-14, 14:55

chris vickery Well Bob there you have it... 07-08-14, 15:04

rob love I used to be big on the epoxy... 07-08-14, 15:44

PaperClip

Jordan Baker Frame got dropped off... 07-08-14, 22:46

Bob Carriere Have you..... 08-08-14, 16:45

rob love No need for the etching... 08-08-14, 19:31

Jordan Baker Got everything I needed... 09-08-14, 05:12

rob love The welded in brackets with a... 09-08-14, 07:07

Bob Carriere Caged nuts..... 10-08-14, 01:18

PaperClip

Jordan Baker Frame all painted. 1 coat of... 10-08-14, 18:25

PaperClip

Jordan Baker Tie Coat has been applied to... 11-08-14, 17:44

Bob Carriere French army ????? 12-08-14, 04:48

PaperClip

Jordan Baker More progress being made. ... 14-08-14, 21:31

PaperClip

Jordan Baker Last two pictures for now. ... 14-08-14, 21:35

Bob Carriere Strange...!!! 14-08-14, 21:52

Jordan Baker Hi Bob. The two steel plates... 14-08-14, 22:37

PaperClip

Phil Waterman Cab Brace 14-08-14, 22:38

Jordan Baker That's it. I just checked my... 14-08-14, 23:06

Bob Carriere Your cab might fall off in a... 14-08-14, 23:21

PaperClip

Jordan Baker Bob, the plates are 12" x 3"... 15-08-14, 00:20

PaperClip

Jordan Baker Couple more progress shots. ... 02-10-14, 20:24

Bob Carriere Looking good..... 03-10-14, 03:06

PaperClip

Jordan Baker Bob, yeah I saw there was... 04-10-14, 06:24

Bob Carriere Different ways to get there.. 04-10-14, 16:28

PaperClip

Jordan Baker Some more progress being... 21-10-14, 05:04

PaperClip

Jordan Baker Saturday I went to my first... 21-10-14, 05:14

Bob Carriere Go to ... 22-10-14, 03:40

rob love One site shows the MR prefix... 22-10-14, 04:08

Jordan Baker Thanks for links Bob. I... 22-10-14, 04:21

rob love http://www.stovebolt.com/ubbth... 22-10-14, 05:23

Bob Carriere What I found was close to.... 22-10-14, 05:30

chris vickery The trouble I have found with... 22-10-14, 12:14

PaperClip

Jordan Baker I have not really done much... 21-03-15, 15:38

PaperClip

Jordan Baker Lastly I managed to find an... 21-03-15, 15:40

Bob Carriere The sign of a true "restorer"... 21-03-15, 18:23

PaperClip

Jordan Baker Thought I would do a trial... 14-04-15, 14:21

Bob Carriere What NO rear window????? 14-04-15, 17:41

Bob Carriere rain gutters..... 14-04-15, 17:48

Jordan Baker Thanks Bob Once I get to... 15-04-15, 18:32

Bob Carriere Sand blast is last step.... 15-04-15, 20:54

PaperClip

Alex van de Wetering Jordan, I don't have any... 15-04-15, 23:38

Bob Carriere No POR does not come in spray... 16-04-15, 02:50

Jordan Baker Thanks Alex and Bob for... 21-04-15, 22:55

PaperClip

Jordan Baker Frames are all painted in the... 04-05-15, 01:51

PaperClip

Jordan Baker Working on a variety of... 04-06-15, 01:56

Bob Carriere Tell us more about the... 04-06-15, 02:17

Jordan Baker Bob, Ive found the soldering... 04-06-15, 02:43

Bob Carriere Concerned...... 04-06-15, 03:56

Jordan Baker Ive only had one tank go... 04-06-15, 04:40

Phil Waterman No Side Curtain Drawings on... 04-06-15, 15:21

Jordan Baker Thanks Phil. I knew there... 05-06-15, 01:51

Stew Robertson A little trick to welding... 05-06-15, 03:29

PaperClip

Jordan Baker Spent the last few days busy... 09-06-15, 16:23

PaperClip

Jordan Baker My biggest challenge was... 09-06-15, 16:37

Bob Carriere Definition of..... 09-06-15, 17:53

PaperClip

JoãoBoscoBarbosa Information about cab sliding... 14-06-15, 03:55

PaperClip

Jordan Baker João, I believe that... 17-06-15, 22:04

Bob Carriere What kind of switch....... 18-06-15, 03:45

Jordan Baker Hi Bob. Thanks for the... 18-06-15, 04:11

Bob Carriere Ask Brian A. 18-06-15, 04:37

chris vickery Hmmm, from your basket making... 19-06-15, 22:49

PaperClip

Jordan Baker Not much to report other then... 20-06-15, 01:52

PaperClip

Jordan Baker Two fuel tanks all wire... 21-06-15, 01:23

PaperClip

Jordan Baker Lots of work was accomplished... 25-06-15, 13:44

PaperClip

Jordan Baker As I said I got a lot done. ... 25-06-15, 14:03

Jordan Baker Next up will be repairing the... 25-06-15, 14:05

Phil Waterman Cork or Brass Floats 25-06-15, 14:39

Jordan Baker One of the sender has a... 25-06-15, 15:31

Phil Waterman Check that it still floats 25-06-15, 21:46

Bob Carriere Using old cork..... 25-06-15, 22:07

Jordan Baker Good point Phill and Bobeeee.... 25-06-15, 23:03

PaperClip

Jordan Baker Not much to report. I was... 08-07-15, 18:58

PaperClip

Jordan Baker Finished rebuilding both fuel... 13-07-15, 04:19

PaperClip

Jordan Baker I have finally started in on... 17-07-15, 23:49

Phil Waterman How do you planned to weld? 18-07-15, 01:50

Bob Carriere A whole different... 18-07-15, 03:01

Bob Carriere Suggestions.... 18-07-15, 03:05

Jordan Baker Thanks Phil and Bob for all... 18-07-15, 06:54

Phil Waterman Foegot about using adhesive 19-07-15, 00:24

PaperClip

Jordan Baker Sandblasted and painted the... 19-07-15, 01:39

Barry Churcher [QUOTE=Jordan... 19-07-15, 13:26

Jordan Baker Well my first bit of real... 20-07-15, 06:26

PaperClip

Jordan Baker As promised some pictures. 21-07-15, 06:01

PaperClip

Jordan Baker Some more pictures. For... 21-07-15, 06:08

Bob Carriere Nice job...... 21-07-15, 18:41

chris vickery When I replicated the rear... 21-07-15, 20:05

Alex van de Wetering Jordan, Excellent work.... 21-07-15, 23:05

Bob Carriere Strange cab 12 rear wall..... 21-07-15, 23:06

Jordan Baker I'd rather overkill it with... 22-07-15, 00:12

PaperClip

Jordan Baker Things moved along rather... 27-07-15, 19:28

PaperClip

Jordan Baker Last group of pictures for... 27-07-15, 19:31

Alex van de Wetering Lovely work again Jordan. I... 27-07-15, 19:41

Bob Carriere Nice work..... 28-07-15, 03:20

Jordan Baker Thanks guys for the... 28-07-15, 03:53

PaperClip

Jordan Baker Busy busy busy has been my... 07-10-15, 03:36

PaperClip

Jordan Baker Finished the work on the... 19-10-15, 13:21

Hanno Spoelstra Great job Jordan! Would you... 19-10-15, 14:11

Jordan Baker Sure Hanno. Ive got the... 19-10-15, 14:52

PaperClip

Jordan Baker Figured out the hole issue... 22-10-15, 01:14

Alex van de Wetering Lovely work again Jordan! ... 22-10-15, 10:34

PaperClip

Jordan Baker Rebuilt the steering gear box... 20-11-15, 18:49

PaperClip

Jordan Baker And the steering wheel. I... 20-11-15, 18:54

PaperClip

Jordan Baker Lastly I picked this up from... 20-11-15, 18:58

Bruce Parker (RIP) Jordan, I think you have the... 20-11-15, 23:08

Bob Carriere Nice job...... 20-11-15, 23:12

Jordan Baker Yeah some days it feels like... 20-11-15, 23:51

PaperClip

Jordan Baker I was able to replace the... 28-11-15, 14:02

PaperClip

Jordan Baker I have also finaly started in... 28-11-15, 14:09

PaperClip

Jordan Baker To remove the front support I... 28-11-15, 14:16

PaperClip

Jordan Baker Finished making the front... 01-12-15, 02:15

PaperClip

Jordan Baker Work today involved cutting... 04-12-15, 01:29

PaperClip

Jordan Baker The past 4 days I managed to... 14-12-15, 14:23

PaperClip

Jordan Baker Once that was all done I took... 14-12-15, 14:29

PaperClip

Jordan Baker Lastly I started fitting the... 14-12-15, 14:37

Bob Carriere Have you considered working... 16-12-15, 18:04

Jordan Baker I wasn't doing the fender... 17-12-15, 14:13

Bob Carriere Deflating.... 17-12-15, 19:56

PaperClip

Jordan Baker Started welding in the new... 18-12-15, 03:21

Bob Carriere Nice job........ 18-12-15, 04:17

PaperClip

Jordan Baker Work has rather ground to a... 27-01-16, 01:26

Phil Waterman Yes Wood Battens 27-01-16, 16:06

David Dunlop Was that to try and prevent... 27-01-16, 18:45

Phil Waterman Yup 27-01-16, 22:27

PaperClip

Jordan Baker Some small progress was made... 19-03-16, 13:40

PaperClip

Jordan Baker It's been a bit since my last... 22-05-16, 01:53

PaperClip

Jordan Baker Just another picture 22-05-16, 01:54

PaperClip

Jordan Baker After working hard at the... 05-06-16, 22:46

PaperClip

Jordan Baker For rolling the sheet to... 05-06-16, 22:49

PaperClip

Jordan Baker More work has been done on... 08-06-16, 21:45

Alex van de Wetering Lovely work Jordan! Thanks... 08-06-16, 23:12

PaperClip

Jordan Baker Here is the tool I came up... 09-06-16, 02:59

PaperClip

Jordan Baker And the clamps work really... 10-06-16, 03:11

PaperClip

Jordan Baker Finaly after months of work I... 21-06-16, 05:20

Bob Carriere Starting to look like a real... 21-06-16, 15:47

PaperClip

Jordan Baker Figured i would try out the... 21-06-16, 22:34

Alex van de Wetering Lovely work Jordan! That... 21-06-16, 23:44

PaperClip

Jordan Baker Hip ring crash pads all done.... 22-06-16, 20:50

PaperClip

Jordan Baker And with the weather we are... 22-06-16, 21:48

Bob Carriere Nice lifesaver!!!! 23-06-16, 03:07

Jordan Baker Not yet. It's nextish on... 23-06-16, 04:11

Bob Carriere Talk with Grant.... 23-06-16, 16:48

PaperClip

Jordan Baker Well the project took a huge... 29-06-16, 17:47

David Dunlop Nice find, Jordan. Big leap... 29-06-16, 21:55

RHClarke Ahem! 30-06-16, 01:06

PaperClip

Jordan Baker Not much to report. I... 13-07-16, 04:12

Stewart Loy nice tarp! 14-07-16, 00:49

Bruce Parker (RIP) So Jordan, are you going to... 14-07-16, 00:57

Jordan Baker I'm glad I got one way back... 14-07-16, 04:20

Frank v R lucky guy, I saw the recovery... 14-08-16, 16:18

Bob Carriere Luca who???? 16-08-16, 02:10

David Dunlop Bob. Luca Giovanetti, in... 16-08-16, 03:42

PaperClip

Jordan Baker Started working on the left... 05-09-16, 02:18

PaperClip

Jordan Baker Work on the fender is all... 08-09-16, 04:10

PaperClip

Jordan Baker Fitted the door back on and... 10-09-16, 18:22

PaperClip

Jordan Baker And the inside across the cab... 10-09-16, 18:23

PaperClip

Jordan Baker Cab rear sliding windows... 15-09-16, 22:43

PaperClip

Jordan Baker Close up of the flocked... 15-09-16, 22:45

PaperClip

Jordan Baker Finally after many weeks of... 27-09-16, 14:34

Phil Waterman Very good work 27-09-16, 15:22

Jordan Baker Oak strips were 1/4" thick. ... 27-09-16, 15:53

Alex van de Wetering Lovely work Jordan! It's... 27-09-16, 16:09

Bob Carriere Steam bending...... 27-09-16, 18:46

JoãoBoscoBarbosa Hi Jordan, Good work and I... 28-09-16, 01:02

PaperClip

Jordan Baker Both doors are now finished... 12-10-16, 04:22

RHClarke Fastenal 12-10-16, 05:11

Jordan Baker 1/4"-20 counter sunk flat... 12-10-16, 05:19

RHClarke Bolts 12-10-16, 05:24

rob love I have been using these guys... 12-10-16, 05:31

Jordan Baker I wonder if there had been a... 12-10-16, 06:01

David Herbert Most zinc plated fasteners... 12-10-16, 11:26

PaperClip

Jordan Baker Ive thought about soaking... 13-10-16, 00:33

PaperClip

Jordan Baker Ive been a little busy... 10-12-16, 00:07

Bob Carriere Tell us about the metal... 11-12-16, 04:52

PaperClip

Jordan Baker I made some great progress... 11-12-16, 05:23

Wayne Hingley Looks great Jordan! You did... 11-12-16, 05:38

Jordan Baker Thanks for the compliments. ... 11-12-16, 05:43

Lynn Eades Here's a hint Jordan; My... 11-12-16, 05:51

Jordan Baker Lynn, thanks for the tip. I... 11-12-16, 05:56

PaperClip

Jordan Baker Well today I spent a few... 05-04-17, 03:35

PaperClip

Jordan Baker With bending them hot we... 05-04-17, 03:38

PaperClip

Jordan Baker I tack welded on the hinge... 06-04-17, 23:40

Robert Bergeron Amazing workmanship Jordan .... 07-04-17, 03:33

PaperClip

Jordan Baker I finished doing my basic... 11-04-17, 09:57

Private_collector Damn fine work, soldier! 11-04-17, 10:09

Bob Carriere Nice job Jordan 11-04-17, 21:36

PaperClip

Jordan Baker Welding is almost done on the... 15-04-17, 14:13

PaperClip

Jordan Baker A big thanks to a fellow... 23-04-17, 01:36

PaperClip

Jordan Baker I started in on making the... 01-05-17, 03:47

PaperClip

Jordan Baker Figured I should get the tail... 05-05-17, 10:46

PaperClip

Bob Carriere Side pockets... 08-05-17, 22:44

Jordan Baker Ha why should I know all... 08-05-17, 23:24

Bob Carriere How many chimney fires have... 08-05-17, 23:28

PaperClip

Jordan Baker Usually by that point things... 08-05-17, 23:39

Bob Carriere Can you....... 09-05-17, 00:46

Jordan Baker Talked to my local machinist... 09-05-17, 04:03

PaperClip

Jordan Baker And last night I had part of... 11-05-17, 20:24

PaperClip

Jordan Baker Nice little accessory that I... 11-05-17, 20:26

Brian Gough nice !!! 11-05-17, 20:51

Jordan Baker I was pretty happy about... 12-05-17, 02:41

PaperClip

Jordan Baker Ok things are now back on... 13-05-17, 17:56

Ganmain Tony Dumb Question 14-05-17, 02:04

Brian Gough First Aid Kit 14-05-17, 03:29

Ganmain Tony Well.. 14-05-17, 10:13

PaperClip

Jordan Baker Well today I went for a bit... 15-05-17, 22:40

Bob Carriere Wow ...what a find..... 15-05-17, 23:18

Jordan Baker I believe after now looking... 15-05-17, 23:24

Robert Bergeron Extraordinary ! Well done !... 15-05-17, 23:25

Niels V Would It be possible for you... 16-05-17, 14:35

PaperClip

Jordan Baker I'll see what I can do but... 17-05-17, 04:45

PaperClip

Jordan Baker Picked up about 87.5% of the... 19-05-17, 21:47

PaperClip

Jordan Baker Spent a couple hrs last night... 21-05-17, 22:23

PaperClip

Jordan Baker Ive been working away in my... 26-05-17, 05:42

PaperClip

Jordan Baker Well tonight I managed to... 02-06-17, 04:19

PaperClip

Jordan Baker Some assembly required. I... 02-06-17, 04:23

PaperClip

Jordan Baker The two top rails provided me... 02-06-17, 04:29

Bob Carriere Fantastic...... 02-06-17, 06:04

PaperClip

Jordan Baker Well it's been a busy day of... 04-06-17, 21:33

PaperClip

Jordan Baker Tonight I finished (not this... 08-06-17, 07:52

PaperClip

Jordan Baker So much welding.....but I'm... 10-06-17, 20:03

Phil Waterman Which POR 11-06-17, 00:28

Bruce Parker (RIP) I think the risk with oil is... 11-06-17, 00:48

Jordan Baker Thanks for the suggestion on... 11-06-17, 06:55

Bruce Parker (RIP) POR inside the doors, POR... 11-06-17, 15:20

PaperClip

Jordan Baker Got a couple of hrs in... 13-06-17, 04:21

Bob Carriere cargo box...... 14-06-17, 15:54

PaperClip

Jordan Baker Yesterday afternoons... 14-06-17, 16:33

Bob Carriere Looking good.... 15-06-17, 03:51

PaperClip

Jordan Baker Today the other side was... 15-06-17, 05:12

PaperClip

Jordan Baker Spent the day getting the... 16-06-17, 05:23

PaperClip

Jordan Baker Last Friday morning I dropped... 20-06-17, 22:54

PaperClip

Jordan Baker Does anyone have any... 20-06-17, 22:56

Peter Duggan Patina 21-06-17, 01:28

Bob Carriere Use the blue tie coat........ 21-06-17, 02:45

Jordan Baker Yes Peter it is patina for... 21-06-17, 02:59

PaperClip

Jordan Baker Todays small amount of... 21-06-17, 22:39

PaperClip

Jordan Baker Spent most of the day Friday... 26-06-17, 04:55

PaperClip

Jordan Baker Fitted on the two sides... 29-06-17, 01:37

PaperClip

Jordan Baker Not much to update. Almost... 05-07-17, 02:50

PaperClip

Jordan Baker Finished with all of the... 09-07-17, 05:08

PaperClip

Jordan Baker Taking advantage of the nice... 11-07-17, 20:28

PaperClip

Jordan Baker Well the box is all painted... 12-07-17, 00:14

Alex van de Wetering Excellent work Jordan. I am... 12-07-17, 12:17

PaperClip

Jordan Baker Here is the NOS buzzer... 13-07-17, 03:33

PaperClip

Jordan Baker The other day with the help... 16-07-17, 04:09

PaperClip

Jordan Baker Todays progress brought to... 17-07-17, 02:16

PaperClip

Jordan Baker Worked today on installing... 19-07-17, 02:37

Robert Bergeron Nicely done Jordan 19-07-17, 02:51

PaperClip

Jordan Baker Today I started fitting the... 31-07-17, 04:16

David Dunlop Hi Jordan. Smart idea... 31-07-17, 13:03

Jordan Baker Hi David. Yes there were... 31-07-17, 13:40

Bob Carriere Beautiful job Jordan. 31-07-17, 16:47

Jordan Baker Bob I've posted some drawings... 31-07-17, 21:08

PaperClip

Jordan Baker I decided to put on the... 04-08-17, 06:04

PaperClip

Jordan Baker I managed to use the original... 04-08-17, 06:13

PaperClip

Jordan Baker Installed the tailgate today.... 09-08-17, 02:16

PaperClip

Jordan Baker Not too much to report over... 30-08-17, 22:06

Bob Carriere Nice job...... 30-08-17, 23:04

Jordan Baker Bob, im confused by your... 30-08-17, 23:35

Bob Carriere Sorry for the cornphusion..... 31-08-17, 15:53

rob love I tried to overcome the flat... 31-08-17, 16:16

PaperClip

Jordan Baker I bought these last night at... 31-08-17, 16:57

PaperClip

Jordan Baker Picked up some nice NOS and... 03-09-17, 04:26

Phil Waterman Quite the score 03-09-17, 14:39

PaperClip

Jordan Baker Finished building the engine... 18-09-17, 04:21

PaperClip

Jordan Baker Things have been quiet in the... 09-11-17, 00:03

Bob Carriere What do you do in your spare... 09-11-17, 03:37

Jordan Baker Spare time... amazingly I do... 09-11-17, 04:27

PaperClip

Jordan Baker Installed the shock mounts... 27-11-17, 18:45

PaperClip

Jordan Baker Too cold in the shop to do... 13-12-17, 21:31

PaperClip

Jordan Baker I also picked up a crystal... 13-12-17, 21:35

PaperClip

Bruce Parker (RIP) I had a horrible time finding... 14-12-17, 01:15

Jordan Baker They still make this chain... 14-12-17, 01:39

Bruce Parker (RIP) Yes, that's the right one and... 14-12-17, 01:54

PaperClip

Jordan Baker Picked up this beauty the... 16-12-17, 19:51

Bob Carriere Beauty is in the eye of the... 17-12-17, 01:53

Jordan Baker Original canvas top for the... 17-12-17, 02:26

Hanno Spoelstra Great find! By the time you... 17-12-17, 15:13

Bob Carriere Wonderful find...... 17-12-17, 15:44

David Dunlop Jordan. Once you have it... 17-12-17, 17:36

rob love Likely for rolling up the... 17-12-17, 20:50

Bruce Parker (RIP) I hate to be a sourpuss, but... 17-12-17, 21:01

Colin Alford Jordan, The Dodge part... 17-12-17, 22:12

Jordan Baker It's been very well stored... 18-12-17, 05:46

PaperClip

Jordan Baker Today I was able to go pickup... 18-12-17, 05:54

Bob Carriere Beats going to the gym......... 18-12-17, 18:43

Jordan Baker It is a Chevy 216 replacement... 19-12-17, 00:31

Bruce Parker (RIP) I hear they call you 'Ole... 19-12-17, 01:18

David Dunlop Hmmm. I wonder if his CMP... 19-12-17, 01:58

Bob Carriere Easy enough job...... 19-12-17, 03:03

Phil Waterman Be sure to check alignment 19-12-17, 13:45

Jordan Baker Ive read through the section... 19-12-17, 15:09

PaperClip

Jordan Baker And the horse shoes... 21-12-17, 21:44

PaperClip

Jordan Baker Managed to get the... 25-12-17, 16:57

Lang Jordan As someone said, it... 26-12-17, 08:41

PaperClip

Jordan Baker Some more "stuff" arrived... 11-01-18, 18:48

PaperClip

Jordan Baker It's been too cold outside to... 17-01-18, 23:19

PaperClip

Jordan Baker Finished painting the parts... 25-01-18, 04:07

Phil Waterman Are you going to paint the... 25-01-18, 14:08

PaperClip

Jordan Baker I've thought about painting... 26-01-18, 01:35

Grant Bowker Rebuild kits exist for... 26-01-18, 02:03

Jordan Baker I was looking at those kits.... 26-01-18, 02:13

Jordan Baker This model after looking it... 26-01-18, 04:24

PaperClip

Jordan Baker Tear down of the generator... 26-01-18, 22:48

Bob Carriere NOS parts..... 26-01-18, 23:00

PaperClip

Jordan Baker The past day or so has been... 02-02-18, 21:21

PaperClip

Jordan Baker I'm always amazed at just how... 02-02-18, 21:27

Frank v R field coil 02-02-18, 22:50

Bob Carriere Some wear...... 02-02-18, 23:12

Jordan Baker Awesome Frank. I'm waiting... 02-02-18, 23:18

Jordan Baker and just heard back from the... 02-02-18, 23:40

Shaun Mastin hey mate whats the go... 03-02-18, 11:32

Jordan Baker Shaun, this was the link I... 03-02-18, 14:21

PaperClip

Jordan Baker Finally started in on... 25-02-18, 02:33

David Dunlop Nice work, Jordan. David 25-02-18, 06:29

PaperClip

Jordan Baker Came home from work this... 25-02-18, 18:09

chris vickery Nice work Jordan. Did you do... 25-02-18, 20:14

Jordan Baker Thanks Chris. No the... 25-02-18, 21:07

PaperClip

Jordan Baker Thanks to ebay I managed to... 27-02-18, 06:06

Grant Bowker Possible problems with sealed... 27-02-18, 10:57

PaperClip

Jordan Baker Ok thanks Grant. What you’ve... 01-03-18, 03:03

rob love I, too, have pondered whether... 01-03-18, 05:38

PaperClip

Jordan Baker While waiting for the... 05-03-18, 23:34

PaperClip

Jordan Baker Some more pictures of the... 05-03-18, 23:36

Bruce Parker (RIP) The inside looks pretty good.... 06-03-18, 01:33

PaperClip

Jordan Baker Left the housing sitting in a... 07-03-18, 16:02

Phil Waterman Looks good 07-03-18, 18:17

PaperClip

Jordan Baker Thanks Phil There was some... 07-03-18, 19:18

PaperClip

Jordan Baker The cast parts and gears all... 07-03-18, 19:19

Bob Carriere Nice work doctor......... 07-03-18, 20:18

Jordan Baker I just went by the part... 07-03-18, 20:36

chris vickery If in doubt bead blast the... 07-03-18, 21:53

Bob Carriere Only one had been problematic... 07-03-18, 22:48

rob love Not all hypoid oils are the... 07-03-18, 23:06

Robert Bergeron Rob/ Jordan : Gl4 could... 07-03-18, 23:46

Lynn Eades A friend of mine is just... 08-03-18, 20:41

PaperClip

Wayne Hingley Royal Purple 08-03-18, 22:57

PaperClip

Jordan Baker Today I took apart the top of... 08-03-18, 23:05

Alex van de Wetering Great work again, Jordan... 08-03-18, 23:47

rob love The Q&As at the link you show... 09-03-18, 02:04

Jordan Baker I went out and checked on... 09-03-18, 02:48

Wayne Hingley Thanks gentlemen. I looked... 09-03-18, 03:39

rob love When I said "stuff", I was... 09-03-18, 05:30

PaperClip

Jordan Baker I also found that one of the... 09-03-18, 23:56

Bob Carriere Wear is common...... and... 10-03-18, 00:05

Barry Churcher I have always used 50W motor... 10-03-18, 01:26

David Dunlop Just a thought, Jordan, but... 10-03-18, 06:06

PaperClip

Jordan Baker Did a bit more work today on... 12-03-18, 02:10

PaperClip

Jordan Baker I also have two different... 12-03-18, 02:12

Bob Carriere Spare parts..... 12-03-18, 03:52

Jordan Baker Hi Bob Thanks for the... 12-03-18, 03:59

PaperClip

Jordan Baker The riveting went very well... 13-03-18, 19:10

PaperClip

Jordan Baker Some more bits done. 14-03-18, 03:56

PaperClip

Jordan Baker Finally got all the NOS... 17-03-18, 02:50

Bob Carriere Ahhhhhh..... 17-03-18, 03:38

rob love Bob: It is said the looks are... 17-03-18, 07:56

Jordan Baker It was all good. Glad to see... 17-03-18, 13:23

PaperClip

Jordan Baker Spent some time on getting... 18-03-18, 17:08

PaperClip

Jordan Baker Today I moved the running... 23-03-18, 00:43

PaperClip

Jordan Baker Engine is finally all... 26-03-18, 04:51

PaperClip

Jordan Baker Today was mostly spent going... 01-04-18, 03:44

PaperClip

Jordan Baker Today I finished installing... 02-04-18, 04:36

Bob Carriere Nice trick... 02-04-18, 13:33

rob love I remember those days of... 02-04-18, 16:18

PaperClip

Jordan Baker I can’t wait to get a metal... 04-04-18, 22:19

PaperClip

Jordan Baker Finally started in on... 10-04-18, 04:44

PaperClip

Jordan Baker The transmission is almost... 12-04-18, 19:05

Grant Bowker On aircraft there are often 2... 12-04-18, 19:16

PaperClip

Jordan Baker I also managed to get the NOS... 13-04-18, 01:51

Phil Waterman Photo of the neutral position... 13-04-18, 18:38

PaperClip

Jordan Baker Took the past day to rebuild... 15-04-18, 23:27

Phil Waterman Had the pin on the gear... 16-04-18, 01:35

Jordan Baker The gear was very slightly... 16-04-18, 02:24

PaperClip

Jordan Baker Picked up the rebuilt... 20-04-18, 18:52

PaperClip

Jordan Baker Has it really been since late... 19-06-18, 22:01

Bob Carriere Bearing and race..... 20-06-18, 02:12

Bob Carriere T case 20-06-18, 02:14

Jordan Baker Just ordered all new bearing... 20-06-18, 04:09

Bob Carriere GBS should be able to show... 20-06-18, 04:31

Jordan Baker Ok thanks for the explanation... 20-06-18, 04:53

Grant Bowker GBS = General Bearing Service... 20-06-18, 13:11

Hanno Spoelstra Hello Jordan, If you go... 20-06-18, 19:26

PaperClip

Jordan Baker Thanks all. I’ve got my... 21-06-18, 02:50

Bob Carriere Good grief...... 21-06-18, 04:40

Jordan Baker Stopped off at a bearing shop... 21-06-18, 18:24

PaperClip

Jordan Baker Spent yesterday and today... 22-06-18, 19:39

Bob Carriere Congrats.......... 22-06-18, 21:19

PaperClip

Jordan Baker All my new bearings arrived... 27-06-18, 01:17

Grant Bowker Your image of the tool is the... 27-06-18, 04:37

PaperClip

Jordan Baker Thanks for the help. My bad... 27-06-18, 06:00

rob love There does not appear to be... 27-06-18, 06:08

Jordan Baker I tried the plate type of... 27-06-18, 06:11

David Herbert Did you use it flat side to... 27-06-18, 10:28

Lynn Eades Jordan,once again, no... 27-06-18, 11:24

PaperClip

Grant Bowker A PDF of the pages on... 27-06-18, 12:11

PaperClip

Jordan Baker Transfer case gears are all... 28-06-18, 23:52

Bob Carriere Amazing size of gears..... 29-06-18, 00:12

Lynn Eades Jordan, that speedo drive... 29-06-18, 02:17

PaperClip

Jordan Baker I’m playing it safe and have... 29-06-18, 03:57

rob love Good on you for waiting, but... 29-06-18, 05:05

rob love Jordan I was just out in... 30-06-18, 01:26

PaperClip

Stewart Loy Closer than that! 30-06-18, 01:45

Jordan Baker Thanks guys. Ill send some... 30-06-18, 06:20

PaperClip

Jordan Baker The NOS speedometer drive... 09-07-18, 21:25

PaperClip

Jordan Baker Today has been a driveshaft... 11-07-18, 19:34

Phil Waterman Old Motor Pool Sergeant... 11-07-18, 21:49

David Herbert Good tip and so simple to do... 11-07-18, 22:12

Jordan Baker Yes i read that previous post... 12-07-18, 00:59

PaperClip

Jordan Baker Today I finished up with the... 15-07-18, 03:19

PaperClip

Jordan Baker Lastly for today my friend... 15-07-18, 03:25

Lynn Eades Jordan, I think a lot of the... 15-07-18, 06:09

PaperClip

Jordan Baker Thanks for the comment that... 15-07-18, 06:29

PaperClip

Jordan Baker New mounting hardware is on... 17-07-18, 20:26

David Herbert Don't you just love... 17-07-18, 23:59

PaperClip

Jordan Baker The transfer case is now all... 23-07-18, 02:27

Bruce Parker (RIP) e Brake drum issue? See if... 23-07-18, 02:39

Grant Bowker I'm not clear which removal... 23-07-18, 02:56

Jordan Baker Just trying to get the wheel... 23-07-18, 04:04

Bruce Parker (RIP) That's a thing???? I've... 24-07-18, 03:17

Grant Bowker Some of the old/original... 24-07-18, 03:48

PaperClip

Jordan Baker Finally after a lot of work... 07-08-18, 04:15

David Dunlop Good job, Jordan. Did you... 07-08-18, 05:56

PaperClip

Jordan Baker So the rims are out. My tire... 01-09-18, 04:01

Bruce Parker (RIP) Jordan, how are you going to... 01-09-18, 13:16

Matthew P Can't say I've heard of... 01-09-18, 13:17

Jordan Baker I’ve got a 7/8 BSF tap and... 01-09-18, 13:34

David Herbert Don't Canadian wheels have... 01-09-18, 16:40

Mike K saw 03-09-18, 11:11

PaperClip

Jordan Baker These rims are all stamped... 03-09-18, 20:44

David Herbert Well that is pretty... 03-09-18, 22:42

PaperClip

Jordan Baker The NOS wheel nuts arrived. 15-09-18, 03:58

PaperClip

Jordan Baker Picked up the new tubes... 17-09-18, 01:16

PaperClip

Jordan Baker Finally all 5 tires are... 29-09-18, 16:57

rob love Deflate them and you'll find... 30-09-18, 05:46

Jordan Baker They were inflated and... 30-09-18, 16:22

rob love Perfect then. 30-09-18, 16:46

Tony Smith And just to clarify (or... 01-10-18, 01:53

Grant Bowker They must be "real" CMP 16"... 01-10-18, 02:05

Tony Smith Yep, got that, just painting... 01-10-18, 02:22

Jordan Baker Yes the rims are General... 01-10-18, 02:45

PaperClip

Jordan Baker Not much to report lately. ... 13-10-18, 22:42

PaperClip

Jordan Baker Again not much progress. The... 01-11-18, 17:00

PaperClip

Jordan Baker 5 sets of new CMP seat... 20-11-18, 00:21

chris vickery Pretty cool Jordan. When I... 20-11-18, 03:36

PaperClip

Jordan Baker Annnnd..... off with the... 16-12-18, 21:44

PaperClip

Jordan Baker The Timken bearing number... 16-12-18, 21:46

Bob Carriere Messy job ain't it???? 16-12-18, 22:57

rob love If you pull the axle shafts,... 16-12-18, 23:57

Bruce Parker (RIP) Agreed on the inner axle... 17-12-18, 00:04

Jordan Baker And with power of the... 17-12-18, 12:36

Bob Carriere Inner seals.... 17-12-18, 16:46

PaperClip

Jordan Baker I picked up a parts washing... 21-12-18, 21:20

Bob Carriere That should keep your hands... 21-12-18, 22:41

Mike Cecil Parts Cleaner Improvements 22-12-18, 17:44

PaperClip

Jordan Baker The parts washer is working... 06-01-19, 20:25

David Herbert Jordan, You have changed a... 06-01-19, 21:25

Bob Carriere Finding cracks....... 06-01-19, 22:25

PaperClip

Jordan Baker The front drums and brake pad... 16-01-19, 18:33

Bob Carriere How lucky...... 16-01-19, 21:47

PaperClip

Bob Carriere Different than mine.....why??? 16-01-19, 22:08

PaperClip

Jordan Baker Here are some more pictures... 16-01-19, 22:23

Bob Carriere Very different indeed..... 17-01-19, 03:07

More replies below current depth...

m606paz Hi Jordan, i have a question... 15-06-21, 01:48

Jordan Baker I just painted them red from... 15-06-21, 04:30

PaperClip

Jordan Baker I finally had some time to... 31-07-21, 03:08

PaperClip

Jordan Baker Lastly I installed the proper... 31-07-21, 03:11

Bruce Parker (RIP) Damn you Jordan and your... 31-07-21, 03:20

Robert Bergeron I agree with Bruce . 31-07-21, 03:50

David Dunlop Interesting about the primer,... 31-07-21, 05:29

Jordan Baker I suspect the DND pattern... 31-07-21, 16:44

Jordan Baker And Robert......the chain is... 31-07-21, 16:45

PaperClip

Jordan Baker Freshly back from the... 04-08-21, 17:31

PaperClip

Jordan Baker Seat parts coming along. I’m... 06-08-21, 04:27

PaperClip

Jordan Baker So many parts for 5 seats. ... 07-08-21, 20:46

rob love I don't consider the seats as... 07-08-21, 21:31

Jordan Baker It’s just been very... 07-08-21, 21:39

Chris Suslowicz I know nothing about the... 08-08-21, 02:19

Bruce Parker (RIP) Hi Chris, have you seen my... 08-08-21, 02:38

Chris Suslowicz I hadn't (and it's Oh God... 08-08-21, 03:20

Bruce Parker (RIP) The puzzling question is that... 08-08-21, 03:38

PaperClip

Jordan Baker Today I got the seat pan... 14-08-21, 00:03

PaperClip

Jordan Baker I also made up a stamping die... 14-08-21, 00:05

PaperClip

Jordan Baker And one can’t forget the 9... 14-08-21, 05:12

David Dunlop Looking really good, Jordan.... 14-08-21, 14:19

PaperClip

Jordan Baker Full day of sewing and the... 21-08-21, 05:31

PaperClip

Jordan Baker Forgot to post these pictures... 21-08-21, 05:49

PaperClip

Jordan Baker Lastly, I noticed after... 21-08-21, 05:51

Harry Moon Wire 3 vs wire 5 21-08-21, 06:34

Bruce Parker (RIP) The HUW uses the same chain... 21-08-21, 14:23

Jordan Baker Had the C15a out to its first... 29-08-21, 05:32

Phil Waterman Now that's different 29-08-21, 14:07

Jordan Baker Hi Phil It was filmed by... 29-08-21, 14:53

PaperClip

Jordan Baker The joys of old trucks. ... 03-09-21, 03:50

Lynn Eades Jordan if you install outer... 03-09-21, 09:52

PaperClip

Grant Bowker Jordan, I don't know whether... 03-09-21, 11:54

rob love My understanding is that the... 03-09-21, 13:50

PaperClip

Jordan Baker So I went through my box of... 03-09-21, 17:18

PaperClip

Jordan Baker Everything is back on with... 03-09-21, 22:49

rob love The outer seals are leather.... 03-09-21, 23:51

Lynn Eades In the Ford Hub (larger CMPs)... 04-09-21, 09:06

Chris Suslowicz You're making a beautiful job... 21-08-21, 09:09

Mike K yes 04-09-21, 12:37

Jordan Baker Thanks for the compliments. ... 04-09-21, 18:24

rob love Not sure what it might have... 08-08-21, 03:00

Bruce Parker (RIP) All Mk.1 Canadian produced... 08-08-21, 03:29

PaperClip

Phil Waterman Transfercase on engine stand 20-06-18, 17:23

PaperClip

Jordan Baker I just spent sometime power... 20-06-18, 18:15

Alex van de Wetering Lovely work on the tanks... 25-06-15, 14:04

Prev

Previous Post

Next Post

Next

#11

Old

06-01-19, 22:25

Bob Carriere Bob Carriere is offline

Bob Carriere is offline

Moderator

Join Date: Mar 2003

Location: Hammond, Ontario

Posts: 5,259

Default

Finding cracks.......

Cracks really stand out....even micro hair cracks..... found cracks in the steering arm of the steering box....... not visible until the wash parts had surface dried then where heated up....then the kerosene seeped out....... steering arm has now been replaced.

Magnetic heaters are sometimes found in loose parts at flea market....$40 at PA is a bit much.

Cheers

__________________
Bob Carriere....B.T.B
C15a Cab 11
Hammond, Ontario
Canada

Reply With Quote

« Previous Thread | Next Thread »

Posting Rules
You may not post new threads You may not post replies You may not post attachments You may not edit your posts BB code is On Smilies are On [IMG] code is On HTML code is Off Forum Rules

Forum Jump

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
1944 C-15A-Wire-5 Restoration	RichCam	The Restoration Forum	706	18-05-23 02:43
*Sold:* 1944 Chev C15A Wire-3	Don Dingwall	For Sale Or Wanted	11	02-04-15 23:26
What was once 2, is now 1. (C15A-Wire-5)	RichCam	The Softskin Forum	3	30-12-11 22:49
photos needed for c15a wire 3 van body	jason meade	The Softskin Forum	5	10-08-11 06:29
Wire loom for C15A Cab13	Jordan Baker	The Restoration Forum	19	28-08-06 03:42

All times are GMT +2. The time now is 12:12.