Info needed: Chevrolet timber tray brackets

[Tony Mathers]

Originally Posted by Shaun Mastin

Thanks for the reply’s ,

Does either one of the tonys have some photos of the whole tray
Thanks

http://www.mapleleafup.net/forums/sh...36&postcount=2

Mine is a workshop tray, but the concept is the same.

[Mike K]

If your looking for the tie down seen in post #9 marked 4 CM . These were still available new in certain hardware stores back in the 1980s .

Have you tried looking on Aliexpress ? The Chinese still make all sorts of obsolete stuff like those tie downs . I bought some old style canvas fittings on Aliexpress. I only needed three strap eyelets but the bag contained at least 200 !

[Tony Mathers]

Originally Posted by Mike Kelly

If your looking for the tie down seen in post #9 marked 4 CM . These were still available new in certain hardware stores back in the 1980s .

Have you tried looking on Aliexpress ? The Chinese still make all sorts of obsolete stuff like those tie downs . I bought some old style canvas fittings on Aliexpress. I only needed three strap eyelets but the bag contained at least 200 !

https://www.ebay.com.au/itm/4-X-CARA...53.m1438.l2649

similiar ones are still available on ebay