It's a great feeling, when it starts!

[Harry Moon]

Originally Posted by Tony Smith

"Timing should be close, apparently!"

Sounds real close to me, Harry. Runs like a Swiss watch. Well done!

I have a little spark indicator between the spark plug and lead, so you can move the distributor back and forth with the ignition on and time it pretty close.
The clutch fork was too tight as when the plate under the pedals is installed it depressed the clutch pedal, I adjusted the 4 wheel engagement to the shifter for the transfer case shifts better, the Winch brake needs to be tightened up a lot and the brakes are holding pressure, I think I'll be pulling the master, grrr

As for leaks, it's coming through the compressor pump and overflowing. Probably needs a new bushing. I also forgot to put on a coolant recovery bottle so that pucked out a bit after I ran it up to temperature. All problems I've dealt with before.