Otter LRC CM4647296 comes home

[Jordan Baker]

The dash rebuild is moving along nicely. The next few posts will be photo heavy with a handful of “before and afters”

First up is the dash as it looks now. The pitting was filled with some jb weld and then carved and sanded down until it was smooth again. The gauge cluster will not be the original one as it was sadly too far gone with the entire bottom portions rotted away.

The second picture is of the parts I’ve rebuilt. See the next few posts for more details on them. The circuit cut out cleaned up quite nicely after vapour blasting. I haven’t tested it yet but it’s on the list to look at.