2006 at the Hammond Barn

[Bob Carriere]

Phil / Rob

Will try to match Phil's picture angle for a better match......

...my first observation ........ shock arm may be longer....
........................................... the attachment at the bottom that is bolted to the axle flange may have a different angle...

...... the centre pin on the springs are wrong and the resulting position of the spring plate is tooooo far forward..??

Phil...... are your front springs design with a centre pin that is not located at dead centre.... which means to get the proper axle distance of 101 inch the springs have to be mounted in the proper orientation...?? Part of the problem here is that Rob is doing his darnest to rebuild it has he found it.... but found condition may be different than original.....

Comments on the off center center bolt any one???

Bob