Modern part numbers for CMPs

[Keith Webb]

Just to clarify, and this is the same on both Chevrolet and Ford, the vehicles with a driven front axle use 3 hoses - one to the axle, then one for each side, while the 4X2 versions have 2 hoses going directly from the chassis.

Originally Posted by Phil Waterman

Hi Wayne

Now you have stumped me, I didn't make the distinction between C15 and C15A or 2x4 vs 4x4. Whose got a parts book to look up if they used different hoses.

If they used the same hose it will probably be the early number where the hose comes straight from each side of the chassis to the wheel. Do you have an old hose for an over all length? I've found the modern parts book that list the hoses by fitting end and length so I can probably give you a US number.

Cheers Phil