Quote:
Originally Posted by Jacques Reed
I am thinking it is the same dimensions, minus the bends, as the hard to find tailpipe bracket that attaches to the left rear fuel tank bracket.
|
As you say Jacques they do seem hard to find. Not one of my vehicles has one, but surprisingly there's one on this stripped down F15A chassis. This $200 pile of blitz bits off ebay is proving to be quite handy (eagle eyes may notice 25pdr wheel on rear) but unfortunately the winch is homebuilt from a Ford axle - something I failed to detect on the ebay pic!
Anyway the bracket is clearly the same as the front one, sans bends, and possibly a bit shorter. There's also a support strap underneath, presumably to minimize flexing over rough terrain...? I imagine this piece would have been straight originally, and was possibly bent by a size 12 boot using the tailpipe as a convenient step!
I'll stick these in the mail too Jacques, you're welcome to keep them but I'll definitely need drawings eventually, unless someone stumbles on a box of NOS!
10-03-13, 10:41
Threaded Mode