Modern part numbers for CMPs

[Phil Waterman]

Originally Posted by Wayne Henderson

Has anyone found a modern replacement part for the C15 front brake hoses and the rear chassis to diff hose?

Hi Wayne

As Hanno's post points to there are the Brakes Hoses front (2 req'd) Raybestos BH5931 front (1 req'd) Raybestos BH25629
rear (1 req'd) Raybestos BH31669 numbers.

But there are two hose lay outs one using 2 hoses one on each side that go directly from the chassis to each backing plate. The other system (later) is a three hose system with one hose going from the chassis to the front axle housing then steel tubing to each end then hoses from each end of the axle to the backing plate.

Reason for change brake hose damage from tire chains I believe.

Recently I replaced the hoses on my HUP using replacements from NAPA #4900
Attributes
Brake Hose End Type : Male - 7/16"-20 & Male/Female - 5/8"-18 External & 7/16"-24 Internal
Brake Hose Length : 17.5"

Rear hose NAPA # 21102
Attributes
Brake Hose End Type : Male/Female - 5/8"-18 External & 7/16"-24 Internal & Male - 7/16"-20
Brake Hose Length : 23.25"

If your local auto supply can not cross those numbers try having them look by the Attributes they should be able to find a listing for the hoses and different lengths.

Hope the numbers help.

Cheers Phil